SMAP-G2 SD 1 HU 1/4 part front plate with LC-Duplex singlemode OS2 blue
High quality SMAP-G2 SD 1 HU 1/4 part front plate with 12 LC-Duplex (6x LCQ) singlemode OS2 blue, RAL 9005 black, numbering 01-12
€36.51
*
(excl. VAT)
Delivery time within 1 weeks
Product number:
170A0210
SMAP-G2 SD 1 HU 1/4 part front plates with matrix numbering
Applications
- SMAP-G2 SD empty panels with 4/4 width partition
Properties
- The PFPs are toolless inserted from the front side and fixed with quick fasteners.
- By this design they can be pulled out to the front for maintenance.
- The numbering of the part front plates PFP is a modular numerical matrix.
- The LC-Duplex and MTP® ports within the PFPs have a fixed 1 to 4 labeling.
- The PFPs can be numbered with their positions they have within the panels with the exchangeable numbering clips the panels are shipped with.
Material and color:
- Steel powder coated RAL9005 black
Adapter types per PFP:
- 6 LC-Duplex ports
- 6 LCQ = 12 LC-Duplex ports
- 6 MTP® ports
- 8 MTP® ports
- 12 MTP® ports
- 12 MU-Duplex ports
- 6 SC-Duplex ports
- 6 E2000-Compact ports
Adapter variants:
- LC-Duplex: OM4 violet, SM PC blue, SM APC green
- LCQ: OM4 violet, SM PC blue, SM APC green
- MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
- MTP® multimode OM4: TIA type A “opposed centered keys” „1 to 1“ magenta
- MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
- MU-Duplex: OSC-Duplex: OM4 violet, SM PC blue, SM APC green
- SC-Duplex: OM4 violet, SM PC blue, SM APC green
- E2000-Compact: SM PC blue, SM APC green
Scope of delivery and packaging:
- Part front plate fully factory-assembled in carton
| Gehäuse: | |
|---|---|
| Kupplung: | |
| Kupplungsfarbe: | blue |
| Produktlinie: | PreCONNECT® SMAP-G2 Standard Density (SD) |
| adapter types: | LC/LC Duplex |
| colour: | RAL 9005 |
| hight units: | 1/4 HU |
| Produktsteckbrief_754144 |
|
pdf
|
3716289 KB
|
| Productprofile_754144 |
|
pdf
|
3682615 KB
|
Login
Accessory Items
Fiber optic trunk cable breakout 8 fibers singlemode OS2, LC-PC/LC-PC, I-V(ZN)HH, with LC Compact
€147.44
(excl. VAT)
PreCONNECT® BREAKOUT
Applications
Data centers and their IT rooms, data center containers and EDGE computing sites.
Universal to use fiber optic cabling system up to 24 fibers per trunk
Cost and attenuation optimized
Focused on a practical and necessary approach
We see breakout trunk cables for short lengths and up to 24 fibers as an alternative product to our proven loose tube cable-based trunk cables with distribution heads.
Breakout trunk cables do not require distribution heads, since the connectors are directly assembled on the robust sub-elements of the breakout cables.
More information about the different applications can be found in separates product information.
Properties
PreCONNECT® BREAKOUT Trunk cable:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Cable ends can be assembled with „variable“ long or "stepped" connector legs.
Installation protection:
The connector legs are packed in a non pull resistant dustproof foil tube. Stepped connector legs can be packed optionally in indoor IP50 dustproof, 150 N tensile, step and kink resistant, installation tubes.
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
MTP®: IEC 61754-7
LC: IEC 61754-20
Polarity:
The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable type:
FRNC-LSZH cable, for more cable specifications see data sheet.
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both cable ends for network documentation, Product ID label on each packaging, including installation manual, available in any standard length.
Benefits
Most cost-effective solution for trunks up to 24 fibers and short lengths
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components.
Fiber optic trunk cable 24 fibers singlemode OS2, LC-PC/LC-PC, U-DQ(ZN)BH, with LC Compact
€510.01
(excl. VAT)
PreCONNECT® STANDARD TRUNKApplicationsInfrastructure cabling within data centers, office buildings and campus.Universal fiber optic systemCost and attenuation optimizedFocused on a practical and necessary approachFor further information on the various applications, see separate product profile at https://osi.rosenberger.com/products-services/fiber-optic-cabling-systems/.PropertiesPreCONNECT® Standard Trunk cables:Cable ends are molded in distribution heads and assembled with „stepped“ connector legs. The used “standard stepping” of the connector legs are suitable for all PreCONNECT® panel systems and for most common panel systems of other manufacturers.The PreCONNECT® cable divider is a mechanically and thermally robust and splice-less cable divider for fiber separation of loose tube cables. With its integrated PreCONNECT® square interface, the cable divider can be tool-less hooked into PreCONNECT® panels for tensile and torsion resistant fixing of the trunk cables.Installation protection:The connector legs and cable dividers are packed in 600 N tensile strength, crush resistant, kink and torsion resistant, installation tubes. Alternatively Indoor IP50 dust-proof or Outdoor IP67 water-proof deliverable.Connector types:According to IEC 61754-x, for more connector specifications see data sheet.SC: IEC 61754-4MTP®: IEC 61754-7E2000®: IEC 61754-15LC: IEC 61754-20Polarity:The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.Fiber types:According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1Cable type:FRNC-LSZH cable, for more cable specifications see data sheet.Length definition:Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.Scope of delivery and packaging:Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both cable ends for network documentation, Product ID label on each packaging, including installation manual, available in any standard length.BenefitsFast and safe installation trough factory assembled Plug & Play systematicHighest quality and cost-efficiency through factory assemblingPreCONNECT® cabling systems consist of perfectly harmonized modular single components.
Fiber optic trunk cable 72 fibers singlemode OS2, LC-PC/LC-PC, I-B(ZN)BH, with LC Compact
€1,617.29
(excl. VAT)
PreCONNECT® STANDARD TRUNK
Applications
Infrastructure cabling within data centers, office buildings and campus.
Universal fiber optic system
Cost and attenuation optimized
Focused on a practical and necessary approach
For further information on the various applications, see separate product profile at https://osi.rosenberger.com/products-services/fiber-optic-cabling-systems/.
Properties
PreCONNECT® Standard Trunk cables:
Cable ends are molded in distribution heads and assembled with „stepped“ connector legs. The used “standard stepping” of the connector legs are suitable for all PreCONNECT® panel systems and for most common panel systems of other manufacturers.
The PreCONNECT® cable divider is a mechanically and thermally robust and splice-less cable divider for fiber separation of loose tube cables. With its integrated PreCONNECT® square interface, the cable divider can be tool-less hooked into PreCONNECT® panels for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The connector legs and cable dividers are packed in 600 N tensile strength, crush resistant, kink and torsion resistant, installation tubes. Alternatively Indoor IP50 dust-proof or Outdoor IP67 water-proof deliverable.
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable type:
FRNC-LSZH cable, for more cable specifications see data sheet.
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both cable ends for network documentation, Product ID label on each packaging, including installation manual, available in any standard length.
Benefits
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components.
SMAP-G2 SD 19" 1'HU empty distribution panels, RAL9005 black, 300mm deep with 12 slot back plane 170A1502
€113.73
(excl. VAT)
PreCONNECT® SMAP-G2 SD 19” 1HU empty distribution panel, RAL9005 black
Applications
Panel system for data center data cabling
For all IT applications like Ethernet and Fibre Channel
Appropriate for Spine-Leaf architectures, by default 12, optional up to 16 trunks coming from Leaf Switches can be accommodated per HU within SMAP-G2 distribution panels next to the Spine-Switch
Properties
Port density: 48 LC-Duplex or MTP® ports
PFPs and cassettes are toolless inserted from the front side and fixed with quick fasteners
PFPs and cassettes can be pulled out to the front for maintenance
Through its adjustable 19“ mounting brackets the panel can be depth variable mounted
Trunk cables can be routed into the panels through their back planes and either side
At panels with trunk routing through their back planes, which are not fully equipped during their first installation, trunk cables can be retrofitted afterwards and removed for maintenance
Front granularity 4/4 width partition
Material and color:
Panel body: aluminum silver
19“ mounting brackets and front: steel powder coated RAL9005 black
Scope of delivery and packaging:
Distribution panel fully factory-assembled in carton
Blind cover in unused cable inputs
SMAP-G2 SD 19" open panel, RAL9005 black
€24.77
(excl. VAT)
PreCONNECT® SMAP-G2 SD 19” 1HU open panel
Applications
Open panel for universal use
Properties
Port density: 48 LC-Duplex or MTP® ports
PFPs and cassettes are toolless inserted from the front side and fixed with quick fasteners
PFPs and cassettes can be pulled out to the front for maintenance
Front granularity 4/4 width partition
Material und Farbe:
powder coated RAL9005 black
Scope of delivery and packaging:
Distribution panel fully factory-assembled in carton
Fiber optic trunk cable 96 fibers singlemode OS2, LC-PC/LC-PC, I-B(ZN)BH, with LC Compact
€2,751.72
(excl. VAT)
PreCONNECT® STANDARD TRUNKApplicationsInfrastructure cabling within data centers, office buildings and campus.Universal fiber optic systemCost and attenuation optimizedFocused on a practical and necessary approachFor further information on the various applications, see separate product profile at https://osi.rosenberger.com/products-services/fiber-optic-cabling-systems/.PropertiesPreCONNECT® Standard Trunk cables:Cable ends are molded in distribution heads and assembled with „stepped“ connector legs. The used “standard stepping” of the connector legs are suitable for all PreCONNECT® panel systems and for most common panel systems of other manufacturers.The PreCONNECT® cable divider is a mechanically and thermally robust and splice-less cable divider for fiber separation of loose tube cables. With its integrated PreCONNECT® square interface, the cable divider can be tool-less hooked into PreCONNECT® panels for tensile and torsion resistant fixing of the trunk cables.Installation protection:The connector legs and cable dividers are packed in 600 N tensile strength, crush resistant, kink and torsion resistant, installation tubes. Alternatively Indoor IP50 dust-proof or Outdoor IP67 water-proof deliverable.Connector types:According to IEC 61754-x, for more connector specifications see data sheet.SC: IEC 61754-4MTP®: IEC 61754-7E2000®: IEC 61754-15LC: IEC 61754-20Polarity:The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.Fiber types:According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1Cable type:FRNC-LSZH cable, for more cable specifications see data sheet.Length definition:Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.Scope of delivery and packaging:Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both cable ends for network documentation, Product ID label on each packaging, including installation manual, available in any standard length.BenefitsFast and safe installation trough factory assembled Plug & Play systematicHighest quality and cost-efficiency through factory assemblingPreCONNECT® cabling systems consist of perfectly harmonized modular single components.
SMAP-G2 HD 19" 1HU empty distribution panels, RAL9005 black, back plane with 12 PreCONNECT® square interfaces, 6/6 widths partition, depth 300 mm
€95.78
(excl. VAT)
PreCONNECT® SMAP-G2 High Density (HD) 19” 1HU empty panel 6/6 width partition
Applications
Panel system for data center data cabling
For all IT applications like Ethernet and Fibre Channel
Appropriate for Spine-Leaf architectures, by default 12, optional up to 16 trunks coming from Leaf Switches can be accommodated per HU within SMAP-G2 distribution panels next to the Spine-Switch
Properties
Port density: 72 LC-Duplex or MTP® ports per height unit HU
PFPs and cassettes are toolless inserted from the front side and fixed with quick fasteners
PFPs and cassettes can be pulled out to the front for maintenance
Through its adjustable 19“ mounting brackets the panel can be depth variable mounted
Trunk cables can be routed into the panels through their back planes and either side
At panels with trunk routing through their back planes, which are not fully equipped during their first installation, trunk cables can be retrofitted afterwards and removed for maintenance
Front granularity 6/6 width partition
Material and color:
Panel body: aluminum silver
19“ mounting brackets and front: steel powder coated RAL9005 black
Scope of delivery and packaging:
Distribution panel fully factory-assembled in carton
Blind cover in unused cable inputs
Fiber optic trunk cable 12 fibers singlemode OS2, LC-PC/LC-PC, U-DQ(ZN)BH, with LC Compact
€328.91
(excl. VAT)
PreCONNECT® STANDARD TRUNKApplicationsInfrastructure cabling within data centers, office buildings and campus.Universal fiber optic systemCost and attenuation optimizedFocused on a practical and necessary approachFor further information on the various applications, see separate product profile at https://osi.rosenberger.com/products-services/fiber-optic-cabling-systems/.PropertiesPreCONNECT® Standard Trunk cables:Cable ends are molded in distribution heads and assembled with „stepped“ connector legs. The used “standard stepping” of the connector legs are suitable for all PreCONNECT® panel systems and for most common panel systems of other manufacturers.The PreCONNECT® cable divider is a mechanically and thermally robust and splice-less cable divider for fiber separation of loose tube cables. With its integrated PreCONNECT® square interface, the cable divider can be tool-less hooked into PreCONNECT® panels for tensile and torsion resistant fixing of the trunk cables.Installation protection:The connector legs and cable dividers are packed in 600 N tensile strength, crush resistant, kink and torsion resistant, installation tubes. Alternatively Indoor IP50 dust-proof or Outdoor IP67 water-proof deliverable.Connector types:According to IEC 61754-x, for more connector specifications see data sheet.SC: IEC 61754-4MTP®: IEC 61754-7E2000®: IEC 61754-15LC: IEC 61754-20Polarity:The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.Fiber types:According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1Cable type:FRNC-LSZH cable, for more cable specifications see data sheet.Length definition:Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.Scope of delivery and packaging:Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both cable ends for network documentation, Product ID label on each packaging, including installation manual, available in any standard length.BenefitsFast and safe installation trough factory assembled Plug & Play systematicHighest quality and cost-efficiency through factory assemblingPreCONNECT® cabling systems consist of perfectly harmonized modular single components.
Fiber optic trunk cable breakout 24 fibers singlemode OS2, LC-PC/LC-PC, I-V(ZN)HH, with LC Compact
€313.80
(excl. VAT)
PreCONNECT® BREAKOUT
Applications
Data centers and their IT rooms, data center containers and EDGE computing sites.
Universal to use fiber optic cabling system up to 24 fibers per trunk
Cost and attenuation optimized
Focused on a practical and necessary approach
We see breakout trunk cables for short lengths and up to 24 fibers as an alternative product to our proven loose tube cable-based trunk cables with distribution heads.
Breakout trunk cables do not require distribution heads, since the connectors are directly assembled on the robust sub-elements of the breakout cables.
More information about the different applications can be found in separates product information.
Properties
PreCONNECT® BREAKOUT Trunk cable:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Cable ends can be assembled with „variable“ long or "stepped" connector legs.
Installation protection:
The connector legs are packed in a non pull resistant dustproof foil tube. Stepped connector legs can be packed optionally in indoor IP50 dustproof, 150 N tensile, step and kink resistant, installation tubes.
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
MTP®: IEC 61754-7
LC: IEC 61754-20
Polarity:
The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable type:
FRNC-LSZH cable, for more cable specifications see data sheet.
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both cable ends for network documentation, Product ID label on each packaging, including installation manual, available in any standard length.
Benefits
Most cost-effective solution for trunks up to 24 fibers and short lengths
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components.
Fiber optic trunk cable 48 fibers singlemode OS2, LC-PC/LC-PC, U-DQ(ZN)BH, with LC Compact
€1,167.22
(excl. VAT)
PreCONNECT® STANDARD TRUNKApplicationsInfrastructure cabling within data centers, office buildings and campus.Universal fiber optic systemCost and attenuation optimizedFocused on a practical and necessary approachFor further information on the various applications, see separate product profile at https://osi.rosenberger.com/products-services/fiber-optic-cabling-systems/.PropertiesPreCONNECT® Standard Trunk cables:Cable ends are molded in distribution heads and assembled with „stepped“ connector legs. The used “standard stepping” of the connector legs are suitable for all PreCONNECT® panel systems and for most common panel systems of other manufacturers.The PreCONNECT® cable divider is a mechanically and thermally robust and splice-less cable divider for fiber separation of loose tube cables. With its integrated PreCONNECT® square interface, the cable divider can be tool-less hooked into PreCONNECT® panels for tensile and torsion resistant fixing of the trunk cables.Installation protection:The connector legs and cable dividers are packed in 600 N tensile strength, crush resistant, kink and torsion resistant, installation tubes. Alternatively Indoor IP50 dust-proof or Outdoor IP67 water-proof deliverable.Connector types:According to IEC 61754-x, for more connector specifications see data sheet.SC: IEC 61754-4MTP®: IEC 61754-7E2000®: IEC 61754-15LC: IEC 61754-20Polarity:The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.Fiber types:According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1Cable type:FRNC-LSZH cable, for more cable specifications see data sheet.Length definition:Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.Scope of delivery and packaging:Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both cable ends for network documentation, Product ID label on each packaging, including installation manual, available in any standard length.BenefitsFast and safe installation trough factory assembled Plug & Play systematicHighest quality and cost-efficiency through factory assemblingPreCONNECT® cabling systems consist of perfectly harmonized modular single components.
Fiber optic trunk cable 12 fibers singlemode OS2, LC-PC/LC-PC, I-B(ZN)BH, with LC Compact
€345.42
(excl. VAT)
PreCONNECT® STANDARD TRUNK
Applications
Infrastructure cabling within data centers, office buildings and campus.
Universal fiber optic system
Cost and attenuation optimized
Focused on a practical and necessary approach
For further information on the various applications, see separate product profile at https://osi.rosenberger.com/products-services/fiber-optic-cabling-systems/.
Properties
PreCONNECT® Standard Trunk cables:
Cable ends are molded in distribution heads and assembled with „stepped“ connector legs. The used “standard stepping” of the connector legs are suitable for all PreCONNECT® panel systems and for most common panel systems of other manufacturers.
The PreCONNECT® cable divider is a mechanically and thermally robust and splice-less cable divider for fiber separation of loose tube cables. With its integrated PreCONNECT® square interface, the cable divider can be tool-less hooked into PreCONNECT® panels for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The connector legs and cable dividers are packed in 600 N tensile strength, crush resistant, kink and torsion resistant, installation tubes. Alternatively Indoor IP50 dust-proof or Outdoor IP67 water-proof deliverable.
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable type:
FRNC-LSZH cable, for more cable specifications see data sheet.
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both cable ends for network documentation, Product ID label on each packaging, including installation manual, available in any standard length.
Benefits
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components.
Fiber optic trunk cable breakout 12 fibers singlemode OS2, LC-PC/LC-PC, I-V(ZN)HH, with LC Compact
€168.39
(excl. VAT)
PreCONNECT® BREAKOUT
Applications
Data centers and their IT rooms, data center containers and EDGE computing sites.
Universal to use fiber optic cabling system up to 24 fibers per trunk
Cost and attenuation optimized
Focused on a practical and necessary approach
We see breakout trunk cables for short lengths and up to 24 fibers as an alternative product to our proven loose tube cable-based trunk cables with distribution heads.
Breakout trunk cables do not require distribution heads, since the connectors are directly assembled on the robust sub-elements of the breakout cables.
More information about the different applications can be found in separates product information.
Properties
PreCONNECT® BREAKOUT Trunk cable:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Cable ends can be assembled with „variable“ long or "stepped" connector legs.
Installation protection:
The connector legs are packed in a non pull resistant dustproof foil tube. Stepped connector legs can be packed optionally in indoor IP50 dustproof, 150 N tensile, step and kink resistant, installation tubes.
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
MTP®: IEC 61754-7
LC: IEC 61754-20
Polarity:
The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable type:
FRNC-LSZH cable, for more cable specifications see data sheet.
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both cable ends for network documentation, Product ID label on each packaging, including installation manual, available in any standard length.
Benefits
Most cost-effective solution for trunks up to 24 fibers and short lengths
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components.
Variants from €161.91*
SMAP-G2 SD 19" 13HU empty distribution panels, RAL9005 black, 300mm deep with 12 slot back plane 170A1502
€191.32
(excl. VAT)
PreCONNECT® SMAP-G2 SD 19” 3HU empty distribution panel, RAL9005 black
Applications
Panel system for data center data cabling
For all IT applications like Ethernet and Fibre Channel
Appropriate for Spine-Leaf architectures, by default 12, optional up to 16 trunks coming from Leaf Switches can be accommodated per HU within SMAP-G2 distribution panels next to the Spine-Switch
Properties
Port density: 144 LC-Duplex or MTP® ports
PFPs and cassettes are toolless inserted from the front side and fixed with quick fasteners
PFPs and cassettes can be pulled out to the front for maintenance
Through its adjustable 19“ mounting brackets the panel can be depth variable mounted
Trunk cables can be routed into the panels through their back planes and either side
At panels with trunk routing through their back planes, which are not fully equipped during their first installation, trunk cables can be retrofitted afterwards and removed for maintenance
Front granularity 12/12 width partition
Material and color:
Panel body: aluminum silver
19“ mounting brackets and front: steel powder coated RAL9005 black
Scope of delivery and packaging:
Distribution panel fully factory-assembled in carton
Blind cover in unused cable inputs
Fiber optic trunk cable 48 fibers singlemode OS2, LC-PC/LC-PC, I-B(ZN)BH, with LC Compact
€1,167.22
(excl. VAT)
PreCONNECT® STANDARD TRUNKApplicationsInfrastructure cabling within data centers, office buildings and campus.Universal fiber optic systemCost and attenuation optimizedFocused on a practical and necessary approachFor further information on the various applications, see separate product profile at https://osi.rosenberger.com/products-services/fiber-optic-cabling-systems/.PropertiesPreCONNECT® Standard Trunk cables:Cable ends are molded in distribution heads and assembled with „stepped“ connector legs. The used “standard stepping” of the connector legs are suitable for all PreCONNECT® panel systems and for most common panel systems of other manufacturers.The PreCONNECT® cable divider is a mechanically and thermally robust and splice-less cable divider for fiber separation of loose tube cables. With its integrated PreCONNECT® square interface, the cable divider can be tool-less hooked into PreCONNECT® panels for tensile and torsion resistant fixing of the trunk cables.Installation protection:The connector legs and cable dividers are packed in 600 N tensile strength, crush resistant, kink and torsion resistant, installation tubes. Alternatively Indoor IP50 dust-proof or Outdoor IP67 water-proof deliverable.Connector types:According to IEC 61754-x, for more connector specifications see data sheet.SC: IEC 61754-4MTP®: IEC 61754-7E2000®: IEC 61754-15LC: IEC 61754-20Polarity:The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.Fiber types:According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1Cable type:FRNC-LSZH cable, for more cable specifications see data sheet.Length definition:Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.Scope of delivery and packaging:Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both cable ends for network documentation, Product ID label on each packaging, including installation manual, available in any standard length.BenefitsFast and safe installation trough factory assembled Plug & Play systematicHighest quality and cost-efficiency through factory assemblingPreCONNECT® cabling systems consist of perfectly harmonized modular single components.
Fiber optic trunk cable 144 fibers singlemode OS2, LC-PC/LC-PC, I-B(ZN)BH, with LC Compact
€4,053.84
(excl. VAT)
PreCONNECT® STANDARD TRUNKApplicationsInfrastructure cabling within data centers, office buildings and campus.Universal fiber optic systemCost and attenuation optimizedFocused on a practical and necessary approachFor further information on the various applications, see separate product profile at https://osi.rosenberger.com/products-services/fiber-optic-cabling-systems/.PropertiesPreCONNECT® Standard Trunk cables:Cable ends are molded in distribution heads and assembled with „stepped“ connector legs. The used “standard stepping” of the connector legs are suitable for all PreCONNECT® panel systems and for most common panel systems of other manufacturers.The PreCONNECT® cable divider is a mechanically and thermally robust and splice-less cable divider for fiber separation of loose tube cables. With its integrated PreCONNECT® square interface, the cable divider can be tool-less hooked into PreCONNECT® panels for tensile and torsion resistant fixing of the trunk cables.Installation protection:The connector legs and cable dividers are packed in 600 N tensile strength, crush resistant, kink and torsion resistant, installation tubes. Alternatively Indoor IP50 dust-proof or Outdoor IP67 water-proof deliverable.Connector types:According to IEC 61754-x, for more connector specifications see data sheet.SC: IEC 61754-4MTP®: IEC 61754-7E2000®: IEC 61754-15LC: IEC 61754-20Polarity:The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.Fiber types:According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1Cable type:FRNC-LSZH cable, for more cable specifications see data sheet.Length definition:Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.Scope of delivery and packaging:Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both cable ends for network documentation, Product ID label on each packaging, including installation manual, available in any standard length.BenefitsFast and safe installation trough factory assembled Plug & Play systematicHighest quality and cost-efficiency through factory assemblingPreCONNECT® cabling systems consist of perfectly harmonized modular single components.
Fiber optic patch cord duplex singlemode OS2, LC-PC/LC-PC, I-V(ZN)H rund 2,0 mm, with LC Compact Push Pull Boot
€19.65
(excl. VAT)
Fiber Optic Patch Cords
Applications
Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.
Properties
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173
Half duplex cables with duplex/simplex connectors „uncrossed“
Duplex cables with simplex connectors on both sides „uncrossed“
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable types:
FRNC-LSZH cable, for more cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber optic patch cord duplex singlemode OS2, CS-PC/LC-PC, I-V(ZN)H rund 2,0 mm, with CS EZ-Flip and LC Compact Pussh Pull Boot, 2,0m
€29.07
(excl. VAT)
Fiber Optic Patch Cords
Applications
Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.
Properties
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173
Half duplex cables with duplex/simplex connectors „uncrossed“
Duplex cables with simplex connectors on both sides „uncrossed“
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable types:
FRNC-LSZH cable, for more cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber optic patch cord duplex singlemode OS2, CS-PC/LC-PC, I-V(ZN)H rund 2,0 mm, with CS EZ-Flip and LC Compact Pussh Pull Boot, 5,0m
€29.00
(excl. VAT)
Fiber Optic Patch Cords
Applications
Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.
Properties
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173
Half duplex cables with duplex/simplex connectors „uncrossed“
Duplex cables with simplex connectors on both sides „uncrossed“
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable types:
FRNC-LSZH cable, for more cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber optic patch cord duplex singlemode OS2, CS-PC/CS-PC, I-V(ZN)H rund 2,0 mm, with CS EZ-Flip, 2,0m
€30.80
(excl. VAT)
Fiber Optic Patch Cords
Applications
Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.
Properties
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173
Half duplex cables with duplex/simplex connectors „uncrossed“
Duplex cables with simplex connectors on both sides „uncrossed“
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable types:
FRNC-LSZH cable, for more cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber optic patch cord duplex singlemode OS2, CS-PC/CS-PC, I-V(ZN)H rund 2,0 mm, with CS EZ-Flip, 5,0m
€31.40
(excl. VAT)
Fiber Optic Patch Cords
Applications
Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.
Properties
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173
Half duplex cables with duplex/simplex connectors „uncrossed“
Duplex cables with simplex connectors on both sides „uncrossed“
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable types:
FRNC-LSZH cable, for more cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber optic patch cord duplex singlemode OS2, LC-PC/LC-PC, I-V(ZN)H(ZN)H rund 4,0 mm, with LC Compact Push Pull Boot
€20.38
(excl. VAT)
Fiber Optic Patch Cords
Applications
Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.
Properties
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173
Half duplex cables with duplex/simplex connectors „uncrossed“
Duplex cables with simplex connectors on both sides „uncrossed“
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable types:
FRNC-LSZH cable, for more cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber optic patch cord duplex singlemode OS2, LC-PC/LC-PC, I-V(ZN)H(ZN)H rund 4,0 mm, with LC Compact Push Pull Tab
€20.48
(excl. VAT)
Fiber Optic Patch Cords
Applications
Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.
Properties
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173
Half duplex cables with duplex/simplex connectors „uncrossed“
Duplex cables with simplex connectors on both sides „uncrossed“
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable types:
FRNC-LSZH cable, for more cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m