Fiber optic trunk cable 48 fibers singlemode OS2, LC-PC/LC-PC, U-DQ(ZN)BH, with LC Compact
High quality PreCONNECT® STANDARD trunk cable 24 channels / 48 fibers with LC-PC Compact connector, polarity crossed channel-wise, connector legs stepped, FRNC universal cable, U-DQ(ZN)BH 4x12E9/125µ yellow, G657.A1 bend insensitive.
Delivery time within 1 weeks
PreCONNECT® STANDARD TRUNK
Applications
Infrastructure cabling within data centers, office buildings and campus.
- Universal fiber optic system
- Cost and attenuation optimized
- Focused on a practical and necessary approach
For further information on the various applications, see separate product profile at https://osi.rosenberger.com/products-services/fiber-optic-cabling-systems/.
Properties
PreCONNECT® Standard Trunk cables:
Cable ends are molded in distribution heads and assembled with „stepped“ connector legs. The used “standard stepping” of the connector legs are suitable for all PreCONNECT® panel systems and for most common panel systems of other manufacturers.
The PreCONNECT® cable divider is a mechanically and thermally robust and splice-less cable divider for fiber separation of loose tube cables. With its integrated PreCONNECT® square interface, the cable divider can be tool-less hooked into PreCONNECT® panels for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The connector legs and cable dividers are packed in 600 N tensile strength, crush resistant, kink and torsion resistant, installation tubes. Alternatively Indoor IP50 dust-proof or Outdoor IP67 water-proof deliverable.
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
- SC: IEC 61754-4
- MTP®: IEC 61754-7
- E2000®: IEC 61754-15
- LC: IEC 61754-20
Polarity:
The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
- OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
- OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
- OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
- OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable type:
FRNC-LSZH cable, for more cable specifications see data sheet.
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both cable ends for network documentation, Product ID label on each packaging, including installation manual, available in any standard length.
Benefits
- Fast and safe installation trough factory assembled Plug & Play systematic
- Highest quality and cost-efficiency through factory assembling
- PreCONNECT® cabling systems consist of perfectly harmonized modular single components.
Allgemein: | General |
---|---|
Betriebstemperatur: | -10°C to +60°C |
CPR-Brandklasse der Kabelmeterware: | Eca |
Faser: | |
Kabel: | |
Kabel-Mantelmaterial: | FRNC-LSZH |
Kern- / Manteldurchmesser: | 9/125µm |
Polarität: | crossed channel-wise |
Produktlinie: | PreCONNECT® STANDARD |
Stecker: | side A / side B |
cable type: | U-DQ(ZN)BH nxm... |
channels/fibers: | 24 / 48 |
connector types: | LC-PC / LC-PC |
fiber type: | singlemode bend insensitive |
Produktsteckbrief_740303 |
pdf
|
2774269 KB
|
|
Productprofile_740303 |
pdf
|
2799284 KB
|
Login