PreCONNECT® OCTO ist ein LWL-Verkabelungssystem für die strukturierte Datenverkabelung mit 4-Kanal-Granularität. Hier finden Sie alle Komponenten auf einen Blick.
Cleaning tool for fiber optic connectors and fiber optic adapters with MTP®/MPO ferrule ( MTP®/MPO cleaner)
€117.35
(excl. VAT)
Cleaner MTP®/MPO ferrulesApplicationsCleaning tool for ferrule end faces of fiber optic connectors type MTP®/MPO. A cleaning directly through an adapter is possible, deinstallation of the connector is not necessary.The cleaning of open patch cable ferrules is also possible with an MTP®/MPO adapter.PropertiesDry ABS textile tapeDisposable tool, no replacement tape can be usedSuitable for MTP® / MPO MM and SM (8°-APC) female and maleScope of delivery and packaging:Individually packed in a carton.
Fiber optic harness 8 fibers singlemode OS2, MTP®-PC-f/ LC-Compact, I-F(ZN)H(ZN)H
€119.21
(excl. VAT)
PreCONNECT® OCTO OM4 MTP®-LCC harness
Applications
For connecting a MPO4+4 transceiver with four LC-Duplex transceivers and for port-breakout of OCTO MTP® trunks:
40GBASE-SR4 MPO4+4 to 4x 10GBASE-SR/SW LC-Duplex
100GBASE-SR4 MPO4+4 to 4x 25GBASE-SR/SW LC-Duplex
200GBASE-SR4 MPO4+4 to 4x 50GBASE-SR/SW LC-Duplex
4x16GFC MPO4+4 to 4x 16GFC LC-Duplex
4x32GFC MPO4+4 to 4x 32GFC LC-Duplex
4x64GFC MPO4+4 to 4x 64GFC LC-Duplex
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO OM4 MTP®-LCC harness:
Robust harness divider with double jacket cable 8 OM4 fibers 3.0 / 4.5 mm FRNC-LSZH at the MTP® side and four 2.0mm 2 fiber LC-Compact leg-lengths 0.5 m, legs numbered 1 to 4.
Connector type:
MTP® 4+4 OCTO, MM, female, Elite quality
LC-COMPACT
Polarity:
Rx to Tx
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive
Length definition:
Order-length = total length
Scope of delivery and packaging:
Attenuation (IL) measured in accordance with IEC 61300-3-4 „C“ or „Substitution“ method, MM 850nm/SM 1310nm, measurement values on request, or can be downloaded from our website by using the serial numbers of the harnesses (https://www.rosenberger.com/products/download-measurement-data/)
Serial number labels with length information at harness divider
Individually packaged in foil bags with product ID label
Benefits
The perfect harness for connecting a MPO4+4 transceiver with four LC-Duplex transceivers and for port-breakout of OCTO MTP® trunks
Fiber optic patch cord 8 fibers multimode OM4, MTP®-PC-f/ MTP®-PC-f, I-F(ZN)H rund 2,0 mm
€63.64
(excl. VAT)
Length in stock:
5 m
PreCONNECT® OCTO MTP® Patch CordsApplicationsMTP® (MPO) based Data Center cabling with 8 fibers per MTP® channel. Appropriate for parallel optics applications:40/100/200 GBASE-SR4400GBASE-SR4.2 BiDi4x16 und 4x32 GFC100G PSM44x10 GBASE-LR200GBASE-DR4400GBASE-DR4More information about the different applications can be found in the product information or in the product profile under Data sheets.PropertiesConnector type:OCTO Patch Cords: MTP® 12 fiber femalePolarity:OCTO Patch Cords: TIA Method B „1 to 12“Fiber types:Multimode OM4 bend-insensitiveSinglemode G.657.A1 bend-insensitive and backwards compatible to G.652.DCable types:FRNC-LSZH cable, for further cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attention report according to IEC 61300-3-4, measurement values on request or via website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging. Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Variants from €61.20*
Fiber optic patch cord 8 fibers multimode OM4, MTP®-PC-f/ MTP®-PC-f, I-F(ZN)H rund 3,0 mm
€49.17
(excl. VAT)
Length in stock:
Custom Length
PreCONNECT® OCTO MTP® Patch CordsApplicationsMTP® (MPO) based Data Center cabling with 8 fibers per MTP® channel. Appropriate for parallel optics applications:40/100/200 GBASE-SR4400GBASE-SR4.2 BiDi4x16 und 4x32 GFC100G PSM44x10 GBASE-LR200GBASE-DR4400GBASE-DR4More information about the different applications can be found in the product information or in the product profile under Data sheets.PropertiesConnector type:OCTO Patch Cords: MTP® 12 fiber femalePolarity:OCTO Patch Cords: TIA Method B „1 to 12“Fiber types:Multimode OM4 bend-insensitiveSinglemode G.657.A1 bend-insensitive and backwards compatible to G.652.DCable types:FRNC-LSZH cable, for further cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attention report according to IEC 61300-3-4, measurement values on request or via website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging. Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber optic patch cord 8 fibers singlemode OS2, MTP®-APC-f/ MTP®-APC-f, I-F(ZN)H rund 2,0 mm
€63.66
(excl. VAT)
Length in stock:
5 m
PreCONNECT® OCTO MTP® Patch CordsApplicationsMTP® (MPO) based Data Center cabling with 8 fibers per MTP® channel. Appropriate for parallel optics applications:40/100/200 GBASE-SR4400GBASE-SR4.2 BiDi4x16 und 4x32 GFC100G PSM44x10 GBASE-LR200GBASE-DR4400GBASE-DR4More information about the different applications can be found in the product information or in the product profile under Data sheets.PropertiesConnector type:OCTO Patch Cords: MTP® 12 fiber femalePolarity:OCTO Patch Cords: TIA Method B „1 to 12“Fiber types:Multimode OM4 bend-insensitiveSinglemode G.657.A1 bend-insensitive and backwards compatible to G.652.DCable types:FRNC-LSZH cable, for further cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attention report according to IEC 61300-3-4, measurement values on request or via website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging. Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Variants from €62.84*
Fiber optic patch cord 8 fibers singlemode OS2, MTP®-APC-f/ MTP®-APC-f, I-F(ZN)H rund 3,0 mm
€56.18
(excl. VAT)
Length in stock:
Custom Length
PreCONNECT® OCTO MTP® Patch Cords
Applications
MTP® (MPO) based Data Center cabling with 8 fibers per MTP® channel.
Appropriate for parallel optics applications:
40/100/200 GBASE-SR4
400GBASE-SR4.2 BiDi
4x16 und 4x32 GFC
100G PSM4
4x10 GBASE-LR
200GBASE-DR4
400GBASE-DR4
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
Connector type:
OCTO Patch Cords: MTP® 12 fiber female
Polarity:
OCTO Patch Cords: TIA Method B „1 to 12“
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Cable types:
FRNC-LSZH cable, for further cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attention report according to IEC 61300-3-4, measurement values on request or via website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging. Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber optic trunk cable breakout 32 fibers multimode OM4, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)HH
€485.73
(excl. VAT)
PreCONNECT® OCTO MTP® Breakout Trunk cable
Applications
MTP® (MPO) based data center cabling with 8 fibers per MTP® channel.
Optimized for parallel optics MPO 4+4 fiber applications:
40/100/200 GBASE-SR4
400GBASE-SR4.2 BiDi
4x16, 4x32 and 4x64 GFC
100GBASE DR4/PSM4
200GBASE-DR4
400GBASE-DR4
4x10 GBASE-LR
Easy migration to higher speed applications.
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO Breakout Trunk cables with I-F(ZN)HH breakout cables:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The trunk connector legs are fitting for the 19“ panel systems and are packed in non-pull resistant dust-proof foil tubes. On request with tensile strength, crush resistant, kink and torsion resistant, installation tubes deliverable.
Connector type:
OCTO Trunk cables: MTP® OCTO 4+4 fiber male
Polarity:
OCTO Trunk cables: TIA Method B „1 to 12“
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® square-interfaces.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum
Insertion loss and return loss measured acc. to IEC 61300-3-4, method B, MM 850/1300nm and SM 1310/1550nm, with measurement protocol
Product label with serial number at both sides
Benefits
MTP® cabling system perfectly fitting for SR4 and DR4/PSM4 applications
Cost reduction through the only for SR4 and DR4/PSM4 needed 8 fibers instead of the so far usual 12 are in one MTP® channel
Fast and safe installation trough factory assembled plug & play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Fiber optic trunk cable breakout 32 fibers singlemode OS2, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)HH
€466.17
(excl. VAT)
PreCONNECT® OCTO MTP® Breakout Trunk cable
Applications
MTP® (MPO) based data center cabling with 8 fibers per MTP® channel.
Optimized for parallel optics MPO 4+4 fiber applications:
40/100/200 GBASE-SR4
400GBASE-SR4.2 BiDi
4x16, 4x32 and 4x64 GFC
100GBASE DR4/PSM4
200GBASE-DR4
400GBASE-DR4
4x10 GBASE-LR
Easy migration to higher speed applications.
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO Breakout Trunk cables with I-F(ZN)HH breakout cables:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The trunk connector legs are fitting for the 19“ panel systems and are packed in non-pull resistant dust-proof foil tubes. On request with tensile strength, crush resistant, kink and torsion resistant, installation tubes deliverable.
Connector type:
OCTO Trunk cables: MTP® OCTO 4+4 fiber male
Polarity:
OCTO Trunk cables: TIA Method B „1 to 12“
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® square-interfaces.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum
Insertion loss and return loss measured acc. to IEC 61300-3-4, method B, MM 850/1300nm and SM 1310/1550nm, with measurement protocol
Product label with serial number at both sides
Benefits
MTP® cabling system perfectly fitting for SR4 and DR4/PSM4 applications
Cost reduction through the only for SR4 and DR4/PSM4 needed 8 fibers instead of the so far usual 12 are in one MTP® channel
Fast and safe installation trough factory assembled plug & play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Fiber optic trunk cable breakout 64 fibers multimode OM4, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)HH
€915.57
(excl. VAT)
PreCONNECT® OCTO MTP® Breakout Trunk cable
Applications
MTP® (MPO) based data center cabling with 8 fibers per MTP® channel.
Optimized for parallel optics MPO 4+4 fiber applications:
40/100/200 GBASE-SR4
400GBASE-SR4.2 BiDi
4x16, 4x32 and 4x64 GFC
100GBASE DR4/PSM4
200GBASE-DR4
400GBASE-DR4
4x10 GBASE-LR
Easy migration to higher speed applications.
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO Breakout Trunk cables with I-F(ZN)HH breakout cables:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The trunk connector legs are fitting for the 19“ panel systems and are packed in non-pull resistant dust-proof foil tubes. On request with tensile strength, crush resistant, kink and torsion resistant, installation tubes deliverable.
Connector type:
OCTO Trunk cables: MTP® OCTO 4+4 fiber male
Polarity:
OCTO Trunk cables: TIA Method B „1 to 12“
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® square-interfaces.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum
Insertion loss and return loss measured acc. to IEC 61300-3-4, method B, MM 850/1300nm and SM 1310/1550nm, with measurement protocol
Product label with serial number at both sides
Benefits
MTP® cabling system perfectly fitting for SR4 and DR4/PSM4 applications
Cost reduction through the only for SR4 and DR4/PSM4 needed 8 fibers instead of the so far usual 12 are in one MTP® channel
Fast and safe installation trough factory assembled plug & play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Fiber optic trunk cable breakout 64 fibers singlemode OS2, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)HH
€873.95
(excl. VAT)
PreCONNECT® OCTO MTP® Breakout Trunk cable
Applications
MTP® (MPO) based data center cabling with 8 fibers per MTP® channel.
Optimized for parallel optics MPO 4+4 fiber applications:
40/100/200 GBASE-SR4
400GBASE-SR4.2 BiDi
4x16, 4x32 and 4x64 GFC
100GBASE DR4/PSM4
200GBASE-DR4
400GBASE-DR4
4x10 GBASE-LR
Easy migration to higher speed applications.
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO Breakout Trunk cables with I-F(ZN)HH breakout cables:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The trunk connector legs are fitting for the 19“ panel systems and are packed in non-pull resistant dust-proof foil tubes. On request with tensile strength, crush resistant, kink and torsion resistant, installation tubes deliverable.
Connector type:
OCTO Trunk cables: MTP® OCTO 4+4 fiber male
Polarity:
OCTO Trunk cables: TIA Method B „1 to 12“
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® square-interfaces.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum
Insertion loss and return loss measured acc. to IEC 61300-3-4, method B, MM 850/1300nm and SM 1310/1550nm, with measurement protocol
Product label with serial number at both sides
Benefits
MTP® cabling system perfectly fitting for SR4 and DR4/PSM4 applications
Cost reduction through the only for SR4 and DR4/PSM4 needed 8 fibers instead of the so far usual 12 are in one MTP® channel
Fast and safe installation trough factory assembled plug & play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Fiber optic trunk cable breakout 8 fibers multimode OM4, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)H(ZN)H
€163.61
(excl. VAT)
PreCONNECT® OCTO MTP® Breakout Trunk cable
Applications
MTP® (MPO) based data center cabling with 8 fibers per MTP® channel.
Optimized for parallel optics MPO 4+4 fiber applications:
40/100/200 GBASE-SR4
400GBASE-SR4.2 BiDi
4x16, 4x32 and 4x64 GFC
100GBASE DR4/PSM4
200GBASE-DR4
400GBASE-DR4
4x10 GBASE-LR
Easy migration to higher speed applications.
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO Breakout Trunk cables with I-F(ZN)HH breakout cables:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The trunk connector legs are fitting for the 19“ panel systems and are packed in non-pull resistant dust-proof foil tubes. On request with tensile strength, crush resistant, kink and torsion resistant, installation tubes deliverable.
Connector type:
OCTO Trunk cables: MTP® OCTO 4+4 fiber male
Polarity:
OCTO Trunk cables: TIA Method B „1 to 12“
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® square-interfaces.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum
Insertion loss and return loss measured acc. to IEC 61300-3-4, method B, MM 850/1300nm and SM 1310/1550nm, with measurement protocol
Product label with serial number at both sides
Benefits
MTP® cabling system perfectly fitting for SR4 and DR4/PSM4 applications
Cost reduction through the only for SR4 and DR4/PSM4 needed 8 fibers instead of the so far usual 12 are in one MTP® channel
Fast and safe installation trough factory assembled plug & play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Fiber optic trunk cable breakout 8 fibers singlemode OS2, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)H(ZN)H
€160.84
(excl. VAT)
PreCONNECT® OCTO MTP® Breakout Trunk cable
Applications
MTP® (MPO) based data center cabling with 8 fibers per MTP® channel.
Optimized for parallel optics MPO 4+4 fiber applications:
40/100/200 GBASE-SR4
400GBASE-SR4.2 BiDi
4x16, 4x32 and 4x64 GFC
100GBASE DR4/PSM4
200GBASE-DR4
400GBASE-DR4
4x10 GBASE-LR
Easy migration to higher speed applications.
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO Breakout Trunk cables with I-F(ZN)HH breakout cables:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The trunk connector legs are fitting for the 19“ panel systems and are packed in non-pull resistant dust-proof foil tubes. On request with tensile strength, crush resistant, kink and torsion resistant, installation tubes deliverable.
Connector type:
OCTO Trunk cables: MTP® OCTO 4+4 fiber male
Polarity:
OCTO Trunk cables: TIA Method B „1 to 12“
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® square-interfaces.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum
Insertion loss and return loss measured acc. to IEC 61300-3-4, method B, MM 850/1300nm and SM 1310/1550nm, with measurement protocol
Product label with serial number at both sides
Benefits
MTP® cabling system perfectly fitting for SR4 and DR4/PSM4 applications
Cost reduction through the only for SR4 and DR4/PSM4 needed 8 fibers instead of the so far usual 12 are in one MTP® channel
Fast and safe installation trough factory assembled plug & play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Fiber optic trunk cable breakout 96 fibers multimode OM4, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)HH
€1,343.05
(excl. VAT)
PreCONNECT® OCTO MTP® Breakout Trunk cable
Applications
MTP® (MPO) based data center cabling with 8 fibers per MTP® channel.
Optimized for parallel optics MPO 4+4 fiber applications:
40/100/200 GBASE-SR4
400GBASE-SR4.2 BiDi
4x16, 4x32 and 4x64 GFC
100GBASE DR4/PSM4
200GBASE-DR4
400GBASE-DR4
4x10 GBASE-LR
Easy migration to higher speed applications.
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO Breakout Trunk cables with I-F(ZN)HH breakout cables:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The trunk connector legs are fitting for the 19“ panel systems and are packed in non-pull resistant dust-proof foil tubes. On request with tensile strength, crush resistant, kink and torsion resistant, installation tubes deliverable.
Connector type:
OCTO Trunk cables: MTP® OCTO 4+4 fiber male
Polarity:
OCTO Trunk cables: TIA Method B „1 to 12“
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® square-interfaces.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum
Insertion loss and return loss measured acc. to IEC 61300-3-4, method B, MM 850/1300nm and SM 1310/1550nm, with measurement protocol
Product label with serial number at both sides
Benefits
MTP® cabling system perfectly fitting for SR4 and DR4/PSM4 applications
Cost reduction through the only for SR4 and DR4/PSM4 needed 8 fibers instead of the so far usual 12 are in one MTP® channel
Fast and safe installation trough factory assembled plug & play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Fiber optic trunk cable breakout 96 fibers singlemode OS2, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)HH
€1,292.06
(excl. VAT)
PreCONNECT® OCTO MTP® Breakout Trunk cable
Applications
MTP® (MPO) based data center cabling with 8 fibers per MTP® channel.
Optimized for parallel optics MPO 4+4 fiber applications:
40/100/200 GBASE-SR4
400GBASE-SR4.2 BiDi
4x16, 4x32 and 4x64 GFC
100GBASE DR4/PSM4
200GBASE-DR4
400GBASE-DR4
4x10 GBASE-LR
Easy migration to higher speed applications.
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO Breakout Trunk cables with I-F(ZN)HH breakout cables:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The trunk connector legs are fitting for the 19“ panel systems and are packed in non-pull resistant dust-proof foil tubes. On request with tensile strength, crush resistant, kink and torsion resistant, installation tubes deliverable.
Connector type:
OCTO Trunk cables: MTP® OCTO 4+4 fiber male
Polarity:
OCTO Trunk cables: TIA Method B „1 to 12“
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® square-interfaces.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum
Insertion loss and return loss measured acc. to IEC 61300-3-4, method B, MM 850/1300nm and SM 1310/1550nm, with measurement protocol
Product label with serial number at both sides
Benefits
MTP® cabling system perfectly fitting for SR4 and DR4/PSM4 applications
Cost reduction through the only for SR4 and DR4/PSM4 needed 8 fibers instead of the so far usual 12 are in one MTP® channel
Fast and safe installation trough factory assembled plug & play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Fiber optic trunk cable harness 8 fibers multimode OM4, MTP®-PC-f/ LC-Compact, I-F(ZN)H(ZN)H
€117.99
(excl. VAT)
PreCONNECT® OCTO OM4 MTP®-LCC harness
Applications
For connecting a MPO4+4 transceiver with four LC-Duplex transceivers and for port-breakout of OCTO MTP® trunks:
40GBASE-SR4 MPO4+4 to 4x 10GBASE-SR/SW LC-Duplex
100GBASE-SR4 MPO4+4 to 4x 25GBASE-SR/SW LC-Duplex
200GBASE-SR4 MPO4+4 to 4x 50GBASE-SR/SW LC-Duplex
4x16GFC MPO4+4 to 4x 16GFC LC-Duplex
4x32GFC MPO4+4 to 4x 32GFC LC-Duplex
4x64GFC MPO4+4 to 4x 64GFC LC-Duplex
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO OM4 MTP®-LCC harness:
Robust harness divider with double jacket cable 8 OM4 fibers 3.0 / 4.5 mm FRNC-LSZH at the MTP® side and four 2.0mm 2 fiber LC-Compact leg-lengths 0.5 m, legs numbered 1 to 4.
Connector type:
MTP® 4+4 OCTO, MM, female, Elite quality
LC-COMPACT
Polarity:
Rx to Tx
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive
Length definition:
Order-length = total length
Scope of delivery and packaging:
Attenuation (IL) measured in accordance with IEC 61300-3-4 „C“ or „Substitution“ method, MM 850nm/SM 1310nm, measurement values on request, or can be downloaded from our website by using the serial numbers of the harnesses (https://www.rosenberger.com/products/download-measurement-data/)
Serial number labels with length information at harness divider
Individually packaged in foil bags with product ID label
Benefits
The perfect harness for connecting a MPO4+4 transceiver with four LC-Duplex transceivers and for port-breakout of OCTO MTP® trunks
Port address field for 19" 1HU, 3/3 height partition and 6/6 OCTO width partition
€6.57
(excl. VAT)
Port address field for 19" 1HU
Anwendungsbereiche
Outer or inner surface of the foldaway front cover 19” 1HU patchcord manager. To be filled with your individual port addresses.
Eigenschaften
Suitable for SMAP-G2 HD 1HE 3/3 height and 6/6 OCTO width partition, rows 1/2/3, columns A01 to F04
low magnetic adhesive
Lieferumfang und Verpackung:
Verpackt im Karton.
SMAP-G2 HD 1/3 HU part front plate with 6/6 width partition, MTPD Multimode grey Typ B algined
€39.12
(excl. VAT)
SMAP-G2 HD 1/3 HU 1/6 part front plates with matrix numbering
Applications
SMAP-G2 HD empty panels with 6/6 width partition
Properties
The PFPs are toolless inserted from the front side and fixed with quick fasteners.
By this design they can be pulled out to the front for maintenance.
The numbering of the part front plates PFP is a modular numerical matrix.
The LC-Duplex and MTP® ports within the PFPs have a fixed 1 to 4 labeling.
The PFPs can be numbered with their positions they have within the panels with the exchangeable numbering clips the panels are shipped with.
Material and color:
Steel powder coated RAL9005 black
Adapter types per PFP:
1 LC8 = 4 LC-Duplex ports
2 MTP®-Duplex = 4 MTP® ports
Adapter variants:
LC8: OM4 violet, SM blue
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
Scope of delivery and packaging:
Part front plate fully factory-assembled in carton
SMAP-G2 HD 1/3 HU part front plate with 6/6 width partition, MTPD Singlemode APC green Typ A
€39.40
(excl. VAT)
SMAP-G2 HD 1/3 HU 1/6 part front plates with matrix numbering
Applications
SMAP-G2 HD empty panels with 6/6 width partition
Properties
The PFPs are toolless inserted from the front side and fixed with quick fasteners.
By this design they can be pulled out to the front for maintenance.
The numbering of the part front plates PFP is a modular numerical matrix.
The LC-Duplex and MTP® ports within the PFPs have a fixed 1 to 4 labeling.
The PFPs can be numbered with their positions they have within the panels with the exchangeable numbering clips the panels are shipped with.
Material and color:
Steel powder coated RAL9005 black
Adapter types per PFP:
1 LC8 = 4 LC-Duplex ports
2 MTP®-Duplex = 4 MTP® ports
Adapter variants:
LC8: OM4 violet, SM blue
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
Scope of delivery and packaging:
Part front plate fully factory-assembled in carton
SMAP-G2 HD MTP module cassettes 1/3 HE with 6/6 width partition, 8 fibres, LC-Duplex / MTP OCTO multimode fitting for PreCONNECT® OCTO trunks
€131.31
(excl. VAT)
SMAP-G2 HD 8 fiber MTP-LC module cassettes
Applications
For Port-Breakout of PreCONNECT® OCTO trunks with MTP® connectors
Fitting in SMAP-G2 HD panel with 6/6 width partition
Properties
1x MTP® female port 4+4F OCTO at the rear side
4 LC-Duplex ports at the front side
Toolless placement of the module cassettes into the panel from the front side, fixing with quick fasteners
Material and color:
Cassette body and front: aluminum powder coated RAL9005 black
Adapter types:
Rear side: 1 MTP®
Front side: 1 LC8 = 4 LC-Duplex ports
Adapter variants:
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
LC8: OM4 violet, SM blue
Number of fibers:
8
Scope of delivery and packaging:
Module cassettes fully factory-assembled in carton
Adapters mounted
SMAP-G2 HD MTP module cassettes 1/3 HE with 6/6 width partition, 8 fibres, LC-Duplex / MTP OCTO singlemode fitting for PreCONNECT® OCTO trunks
€130.06
(excl. VAT)
SMAP-G2 HD 8 fiber MTP-LC module cassettes
Applications
For Port-Breakout of PreCONNECT® OCTO trunks with MTP® connectors
Fitting in SMAP-G2 HD panel with 6/6 width partition
Properties
1x MTP® female port 4+4F OCTO at the rear side
4 LC-Duplex ports at the front side
Toolless placement of the module cassettes into the panel from the front side, fixing with quick fasteners
Material and color:
Cassette body and front: aluminum powder coated RAL9005 black
Adapter types:
Rear side: 1 MTP®
Front side: 1 LC8 = 4 LC-Duplex ports
Adapter variants:
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
LC8: OM4 violet, SM blue
Number of fibers:
8
Scope of delivery and packaging:
Module cassettes fully factory-assembled in carton
Adapters mounted
SMAP-G2 HD Port-Breakout-Unit, 1/3 HE with 6/6 width partition, MTP-LC, OCTO 8 fibres, multimode OM4
€167.61
(excl. VAT)
SMAP-G2 HD 8 fiber MTP-LC Port-Breakout-Unit
Applications
For installation in SMAP-G2 HD panel with 6/6 width partition
Properties
1x MTP®4+4 OCTO female connector at cable pigtail
4 LC-Duplex ports at the front side
Toolless placement of the module cassettes into the panel from the front side, fixing with quick fasteners
Material and color:
Cassette body and front: aluminum powder coated RAL9005 black
Adapter types:
Front side: 1 LC8 = 4 LC-Duplex ports
Adapter variants:
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
LC8: OM4 violet, SM blue
Number of fibers:
8
Scope of delivery and packaging:
Port-Breakout-Unit panel fully factory-assembled in carton
Adapters mounted
SMAP-G2 HD Port-Breakout-Unit, 1/3 HE with 6/6 width partition, MTP-LC, OCTO 8 fibres, singlemode OS2
€168.63
(excl. VAT)
SMAP-G2 HD 8 fiber MTP-LC Port-Breakout-Unit
Applications
For installation in SMAP-G2 HD panel with 6/6 width partition
Properties
1x MTP®4+4 OCTO female connector at cable pigtail
4 LC-Duplex ports at the front side
Toolless placement of the module cassettes into the panel from the front side, fixing with quick fasteners
Material and color:
Cassette body and front: aluminum powder coated RAL9005 black
Adapter types:
Front side: 1 LC8 = 4 LC-Duplex ports
Adapter variants:
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
LC8: OM4 violet, SM blue
Number of fibers:
8
Scope of delivery and packaging:
Port-Breakout-Unit panel fully factory-assembled in carton
Adapters mounted