Fiber optic trunk cable multijumper 12 fibers singlemode OS2, SC-PC/SC-PC, U-DQ(ZN)BH
High quality PreCONNECT® STANDARD TRUNK MULTIJUMPER 6 channels / 12 fibers with SC-PC duplex connector, polarity crossed channel-wise, connector legs not stepped, FRNC universal cable, U-DQ(ZN)BH 12E9/125µ yellow, G657.A1 bend insensitive.
Delivery time within 1 weeks
PreCONNECT® TRUNK MULTIJUMPER
Applications
Cabling of large switches and floor-standing IT hardware within data centers, to represent their ports in a patch location.
- Trunk Multijumper up to 144 fibers per trunk
- Cost and attenuation optimized
- Focused on a practical and necessary approach
More information about the different applications can be found in the separates product information.
Properties
PreCONNECT® MULTIJUMPER Trunk cable:
Cable ends are molded in distribution heads and assembled with „variable“ long or "stepped" connector legs.
The PreCONNECT® cable divider is a mechanically and thermally robust and splice-less cable divider for fiber separation of loose tube cables. With its integrated PreCONNECT® square interface, the cable divider can be tool-less hooked into PreCONNECT® panels for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The connector legs and cable dividers are packed in with a non pull resistant dustproof foil tube. Stepped connector legs can be packed optionally in 600 N tensile strength, crush resistant, kink and torsion resistant, installation tubes.
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
- SC: IEC 61754-4
- MTP®: IEC 61754-7
- E2000®: IEC 61754-15
- LC: IEC 61754-20
Polarity:
The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
- OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
- OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
- OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
- OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable type:
FRNC-LSZH cable, for more cable specifications see data sheet.
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both sides of cable ends for network documentation, Product ID label on each packaging, including installation manual available in any standard length.
Benefits
- Cost reduction through direct attach of the IT Hardware Transceivers to the TMJ connector legs
- Most cost-effective solution for trunks up to 24 fibers and short lengths
- Attenuation reduction through the saving of one connection in the transmission channel
- Application specific individually configurable
- Fast and safe installation trough factory assembled Plug & Play systematic
- Highest quality and cost-efficiency through factory assembling
- PreCONNECT® cabling systems consist of perfectly harmonized modular single components.
| Allgemein: | General |
|---|---|
| Betriebstemperatur: | -10°C to +60°C |
| CPR-Brandklasse der Kabelmeterware: | Dca |
| Faser: | |
| Kabel: | |
| Kabel-Mantelmaterial: | FRNC-LSZH |
| Kern- / Manteldurchmesser: | 9/125µm |
| Polarität: | crossed channel-wise |
| Produktlinie: | PreCONNECT® TRUNK MULTIJUMPER |
| Stecker: | side A / side B |
| cable type: | U-DQ(ZN)BH n... |
| channels/fibers: | 6 / 12 |
| connector types: | SC-PC / SC-PC |
| fiber type: | singlemode bend insensitive |
| Produktsteckbrief_771845 |
|
pdf
|
2069409 KB
|
| Productprofile_771845 |
|
pdf
|
1788816 KB
|
Login