Patch cord Cat. 6A RJ45 / RJ45 conncector, shielded 4 pairs 10GBE, S/FTP 4x2, 3,0 m
High quality copper patch cord 4 pairs mit RJ45-connector shielded, polarity 1 to 1, FRNC-LSZH indoor cable, S/FTP flex 4 PiMF AWG27/7 grey up to 900 MHz, Cat. 6A 10GBE, GHMT PVP certified.
€7.76
*
(excl. VAT)
Delivery time within 1 weeks
Product number:
820A1019M-3
Copper Patch Cords shielded
Applications
Patch cords suitable for cabling in data centers and office buildings.
Properties
GHMT PVP certified RJ45 patch cable shielded Cat. 6A ISO/IEC.
Connector type:
- RJ45 connector (8/8) shielded
- 2-component boots with latch protection and protective cap
Cable:
- S/FTP, flex 4 PiMF AWG27/7 Cat.7
- FRNC-LSZH cable jacket
- Color grey
- Diameter 5,7 mm
Scope of delivery and packaging:
Dust protected and individually packed in foil bags, available in any standard length.
| Allgemein: | General |
|---|---|
| Kabel: | |
| Kanalanzahl: | 1 |
| Polarität: | 1 to 1 |
| Produktlinie: | Copper Patch Cord |
| Stecker: | side A / side B |
| cable type: | S/FTP flex 4 PiMF AWG27/7 |
| connector types: | RJ45-connector / RJ45-connector |
| Produktsteckbrief_766158 |
|
pdf
|
896622 KB
|
| Productprofile_766158 |
|
pdf
|
970797 KB
|
Login
Accessory Items
Copper trunk cable shielded 6 channels Cat. 6 EA 10GBE, RJ45-connector/RJ45-connector, S/FTP 4x2, 50,0 m
€902.66
(excl. VAT)
PreCONNECT® COPPER ToR G2
Applications
IT room cabling within data centers
Data center and EDGE computing containers
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® COPPER ToR – Generation 2 is optimized for „top-of-the-rack“ „plug-and-play“ installations in data centers.
Connector- / jack type:
Both sides factory assembled with each six RJ45 Keystone jack modules Cat.6A fanout legs protected with overall copper braids.
Cable:
6-Channel S/FTP Cat.7
Six 4x2xAWG23/1 solid wire foil-screened pairs, below overall copper braid
FRNC-LSZH cable jacket
Color aqua
Diameter = 18 mm
Permanent link 10GBE class EA up to 80m
Connector legs:
FRNC-LSZH-Kabel, more cable specifications see data sheet.
Längendefinition:
The legs of the RJ45 jack modules are protected with overall copper braids, to guarantee the shielding and grounding of the entire trunk.The leg-lengths of the RJ45 Keystone jack modules are matched to the PreCONNECT® ToR G2 19” panel.
Scope of delivery and packaging:
„Plug-and Play” functionality and 100% factory measured, as cable ring in cardboard-box.
Benefits
Cost-effective through space and weight savings by the 24-pair cable, particularly appropriate for Top-of-the-Rack (ToR) cabling
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Copper trunk cable shielded 6 channels Cat. 6 EA 10GBE, RJ45-connector/RJ45-connector, S/FTP 4x2, 15,0 m
€368.42
(excl. VAT)
PreCONNECT® COPPER ToR G2
Applications
IT room cabling within data centers
Data center and EDGE computing containers
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® COPPER ToR – Generation 2 is optimized for „top-of-the-rack“ „plug-and-play“ installations in data centers.
Connector- / jack type:
Both sides factory assembled with each six RJ45 Keystone jack modules Cat.6A fanout legs protected with overall copper braids.
Cable:
6-Channel S/FTP Cat.7
Six 4x2xAWG23/1 solid wire foil-screened pairs, below overall copper braid
FRNC-LSZH cable jacket
Color aqua
Diameter = 18 mm
Permanent link 10GBE class EA up to 80m
Connector legs:
FRNC-LSZH-Kabel, more cable specifications see data sheet.
Längendefinition:
The legs of the RJ45 jack modules are protected with overall copper braids, to guarantee the shielding and grounding of the entire trunk.The leg-lengths of the RJ45 Keystone jack modules are matched to the PreCONNECT® ToR G2 19” panel.
Scope of delivery and packaging:
„Plug-and Play” functionality and 100% factory measured, as cable ring in cardboard-box.
Benefits
Cost-effective through space and weight savings by the 24-pair cable, particularly appropriate for Top-of-the-Rack (ToR) cabling
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
F/FTP Cat.6A copper data cable 4x2xAWG23 500MHz FRNC CPR Dca
€178.22
(excl. VAT)
Copper data cable
Description
Electrically and mechanically stable Cat.6A data cable - exceeds the requirements of ISO/IEC 11801, EN 50288-5, IEC 61156-5 and EN 50174-2. Has very good EMC properties due to the combined pair and braided shielding. The data cable is compatible with all common connectors according to EN 50173 and ISO/IEC 11801.
Application
For the transmission of analog and digital signals within structured cabling in the backbon, riser and horizontal in the frequency range up to 500MHz. Suitable for applications up to class EA (500MHz). Tested for use in accordance with Euro Fire Class Dca.
Cable supports
IEEE 802.3: Ethernet 10Base-T; Fast Ethernet 100Base-T; Gigabit Ethernet 1000Base-T; 10GBase-T
IEEE 802.5: ISDN; FDDI; ATM; Cable sharing
IEEE 802.3at: PoE, PoE+
Standards
EN 50288-5-1; EN 50173; EN 50174-2; ISO/IEC 11801 2. Ausgabe; IEC 61156-5
Scope of delivery and package
Dependent on the length on disposable drums (500 m) or in portable boxes (305 m).Product ID label on each packaging.
F/UTP Cat.6A copper data cable 4x2xAWG23 500MHz FRNC CPR Dca
€178.18
(excl. VAT)
Copper data cable
Description
Electrically and mechanically stable Cat.6A data cable - exceeds the requirements of ISO/IEC 11801, EN 50288-5, IEC 61156-5 and EN 50174-2. Has decent EMC properties due to the combined pair and braided shielding. The data cable is compatible with all common connectors according to EN 50173 and ISO/IEC 11801.
Application
For the transmission of analog and digital signals within structured cabling in the backbon, riser and horizontal in the frequency range up to 500MHz. Suitable for applications up to class EA (500MHz). Tested for use in accordance with Euro Fire Class Dca.
Cable supports
IEEE 802.3: Ethernet 10Base-T; Fast Ethernet 100Base-T; Gigabit Ethernet 1000Base-T; 10GBase-T
IEEE 802.5: ISDN; FDDI; ATM; Cable sharing
IEEE 802.3at: PoE, PoE+
Standards
EN 50288-5-1; EN 50173; EN 50174-2; ISO/IEC 11801 2. Ausgabe; IEC 61156-5
Scope of delivery and package
Dependent on the length on disposable drums (500 m) or in portable boxes (305 m).Product ID label on each packaging.
Copper trunk cable shielded 6 channels Cat. 6 EA 10GBE, RJ45-connector/RJ45-connector, S/FTP 4x2, 10,0 m
€292.07
(excl. VAT)
PreCONNECT® COPPER ToR G2
Applications
IT room cabling within data centers
Data center and EDGE computing containers
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® COPPER ToR – Generation 2 is optimized for „top-of-the-rack“ „plug-and-play“ installations in data centers.
Connector- / jack type:
Both sides factory assembled with each six RJ45 Keystone jack modules Cat.6A fanout legs protected with overall copper braids.
Cable:
6-Channel S/FTP Cat.7
Six 4x2xAWG23/1 solid wire foil-screened pairs, below overall copper braid
FRNC-LSZH cable jacket
Color aqua
Diameter = 18 mm
Permanent link 10GBE class EA up to 80m
Connector legs:
FRNC-LSZH-Kabel, more cable specifications see data sheet.
Längendefinition:
The legs of the RJ45 jack modules are protected with overall copper braids, to guarantee the shielding and grounding of the entire trunk.The leg-lengths of the RJ45 Keystone jack modules are matched to the PreCONNECT® ToR G2 19” panel.
Scope of delivery and packaging:
„Plug-and Play” functionality and 100% factory measured, as cable ring in cardboard-box.
Benefits
Cost-effective through space and weight savings by the 24-pair cable, particularly appropriate for Top-of-the-Rack (ToR) cabling
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Copper trunk cable shielded 6 channels Cat. 6 EA 10GBE, RJ45-connector/RJ45-connector, S/FTP 4x2, 20,0 m
€444.73
(excl. VAT)
PreCONNECT® COPPER ToR G2
Applications
IT room cabling within data centers
Data center and EDGE computing containers
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® COPPER ToR – Generation 2 is optimized for „top-of-the-rack“ „plug-and-play“ installations in data centers.
Connector- / jack type:
Both sides factory assembled with each six RJ45 Keystone jack modules Cat.6A fanout legs protected with overall copper braids.
Cable:
6-Channel S/FTP Cat.7
Six 4x2xAWG23/1 solid wire foil-screened pairs, below overall copper braid
FRNC-LSZH cable jacket
Color aqua
Diameter = 18 mm
Permanent link 10GBE class EA up to 80m
Connector legs:
FRNC-LSZH-Kabel, more cable specifications see data sheet.
Längendefinition:
The legs of the RJ45 jack modules are protected with overall copper braids, to guarantee the shielding and grounding of the entire trunk.The leg-lengths of the RJ45 Keystone jack modules are matched to the PreCONNECT® ToR G2 19” panel.
Scope of delivery and packaging:
„Plug-and Play” functionality and 100% factory measured, as cable ring in cardboard-box.
Benefits
Cost-effective through space and weight savings by the 24-pair cable, particularly appropriate for Top-of-the-Rack (ToR) cabling
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Copper trunk cable shielded 6 channels Cat. 6 EA 10GBE, RJ45-connector/RJ45-connector, S/FTP 4x2, 25,0 m
€521.06
(excl. VAT)
PreCONNECT® COPPER ToR G2
Applications
IT room cabling within data centers
Data center and EDGE computing containers
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® COPPER ToR – Generation 2 is optimized for „top-of-the-rack“ „plug-and-play“ installations in data centers.
Connector- / jack type:
Both sides factory assembled with each six RJ45 Keystone jack modules Cat.6A fanout legs protected with overall copper braids.
Cable:
6-Channel S/FTP Cat.7
Six 4x2xAWG23/1 solid wire foil-screened pairs, below overall copper braid
FRNC-LSZH cable jacket
Color aqua
Diameter = 18 mm
Permanent link 10GBE class EA up to 80m
Connector legs:
FRNC-LSZH-Kabel, more cable specifications see data sheet.
Längendefinition:
The legs of the RJ45 jack modules are protected with overall copper braids, to guarantee the shielding and grounding of the entire trunk.The leg-lengths of the RJ45 Keystone jack modules are matched to the PreCONNECT® ToR G2 19” panel.
Scope of delivery and packaging:
„Plug-and Play” functionality and 100% factory measured, as cable ring in cardboard-box.
Benefits
Cost-effective through space and weight savings by the 24-pair cable, particularly appropriate for Top-of-the-Rack (ToR) cabling
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
S/FTP Cat.7 copper data cable 4x2xAWG23 1000MHz FRNC CPR Dca
€164.85
(excl. VAT)
Copper data cable
Description
Electrically and mechanically excellent Cat.7 data cable - exceeds the requirements of ISO/IEC 11801, EN 50288-4, IEC 61156-5 and EN 50174-2. Has exceptional EMC properties due to the combined pair and braided shielding. The data cable is compatible with all common connectors according to EN 50173 and ISO/IEC 11801.
Application
For the transmission of analog and digital signals within structured cabling in the backbon, riser and horizontal in the frequency range up to 1000MHz. Suitable for applications up to class F (600MHz). Tested for use in accordance with Euro Fire Class Dca.
Cable supports
IEEE 802.3: Ethernet 10Base-T; Fast Ethernet 100Base-T; Gigabit Ethernet 1000Base-T; 10GBase-T
IEEE 802.5: ISDN; FDDI; ATM; Cable sharing
IEEE 802.3at: PoE, PoE+
Standards
EN 50288-4-1; EN 50173; EN 50174-2; ISO/IEC 11801 2.edition; IEC 61156-5
Scope of delivery and package
Dependent on the length on disposable drums (500 m) or in portable boxes (305 m).Product ID label on each packaging.
F/FTP Cat.6A copper data cable 4x2xAWG23 500MHz FRNC CPR Dca
€348.45
(excl. VAT)
Copper data cable
Description
Electrically and mechanically stable Cat.6A data cable - exceeds the requirements of ISO/IEC 11801, EN 50288-5, IEC 61156-5 and EN 50174-2. Has very good EMC properties due to the combined pair and braided shielding. The data cable is compatible with all common connectors according to EN 50173 and ISO/IEC 11801.
Application
For the transmission of analog and digital signals within structured cabling in the backbon, riser and horizontal in the frequency range up to 500MHz. Suitable for applications up to class EA (500MHz). Tested for use in accordance with Euro Fire Class Dca.
Cable supports
IEEE 802.3: Ethernet 10Base-T; Fast Ethernet 100Base-T; Gigabit Ethernet 1000Base-T; 10GBase-T
IEEE 802.5: ISDN; FDDI; ATM; Cable sharing
IEEE 802.3at: PoE, PoE+
Standards
EN 50288-5-1; EN 50173; EN 50174-2; ISO/IEC 11801 2. Ausgabe; IEC 61156-5
Scope of delivery and package
Dependent on the length on disposable drums (500 m) or in portable boxes (305 m).Product ID label on each packaging.
F/UTP Cat.6A copper data cable 4x2xAWG23 500MHz FRNC CPR Dca
€486.45
(excl. VAT)
Copper data cable
Description
Electrically and mechanically stable Cat.6A data cable - exceeds the requirements of ISO/IEC 11801, EN 50288-5, IEC 61156-5 and EN 50174-2. Has decent EMC properties due to the combined pair and braided shielding. The data cable is compatible with all common connectors according to EN 50173 and ISO/IEC 11801.
Application
For the transmission of analog and digital signals within structured cabling in the backbon, riser and horizontal in the frequency range up to 500MHz. Suitable for applications up to class EA (500MHz). Tested for use in accordance with Euro Fire Class Dca.
Cable supports
IEEE 802.3: Ethernet 10Base-T; Fast Ethernet 100Base-T; Gigabit Ethernet 1000Base-T; 10GBase-T
IEEE 802.5: ISDN; FDDI; ATM; Cable sharing
IEEE 802.3at: PoE, PoE+
Standards
EN 50288-5-1; EN 50173; EN 50174-2; ISO/IEC 11801 2. Ausgabe; IEC 61156-5
Scope of delivery and package
Dependent on the length on disposable drums (500 m) or in portable boxes (305 m).Product ID label on each packaging.
Accessory Items
Copper trunk cable shielded 6 channels Cat. 6 EA 10GBE, RJ45-connector/RJ45-connector, S/FTP 4x2, 25,0 m
€521.06
(excl. VAT)
PreCONNECT® COPPER ToR G2
Applications
IT room cabling within data centers
Data center and EDGE computing containers
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® COPPER ToR – Generation 2 is optimized for „top-of-the-rack“ „plug-and-play“ installations in data centers.
Connector- / jack type:
Both sides factory assembled with each six RJ45 Keystone jack modules Cat.6A fanout legs protected with overall copper braids.
Cable:
6-Channel S/FTP Cat.7
Six 4x2xAWG23/1 solid wire foil-screened pairs, below overall copper braid
FRNC-LSZH cable jacket
Color aqua
Diameter = 18 mm
Permanent link 10GBE class EA up to 80m
Connector legs:
FRNC-LSZH-Kabel, more cable specifications see data sheet.
Längendefinition:
The legs of the RJ45 jack modules are protected with overall copper braids, to guarantee the shielding and grounding of the entire trunk.The leg-lengths of the RJ45 Keystone jack modules are matched to the PreCONNECT® ToR G2 19” panel.
Scope of delivery and packaging:
„Plug-and Play” functionality and 100% factory measured, as cable ring in cardboard-box.
Benefits
Cost-effective through space and weight savings by the 24-pair cable, particularly appropriate for Top-of-the-Rack (ToR) cabling
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
S/FTP Cat.7 copper data cable 4x2xAWG23 1000MHz FRNC CPR Dca
€164.85
(excl. VAT)
Copper data cable
Description
Electrically and mechanically excellent Cat.7 data cable - exceeds the requirements of ISO/IEC 11801, EN 50288-4, IEC 61156-5 and EN 50174-2. Has exceptional EMC properties due to the combined pair and braided shielding. The data cable is compatible with all common connectors according to EN 50173 and ISO/IEC 11801.
Application
For the transmission of analog and digital signals within structured cabling in the backbon, riser and horizontal in the frequency range up to 1000MHz. Suitable for applications up to class F (600MHz). Tested for use in accordance with Euro Fire Class Dca.
Cable supports
IEEE 802.3: Ethernet 10Base-T; Fast Ethernet 100Base-T; Gigabit Ethernet 1000Base-T; 10GBase-T
IEEE 802.5: ISDN; FDDI; ATM; Cable sharing
IEEE 802.3at: PoE, PoE+
Standards
EN 50288-4-1; EN 50173; EN 50174-2; ISO/IEC 11801 2.edition; IEC 61156-5
Scope of delivery and package
Dependent on the length on disposable drums (500 m) or in portable boxes (305 m).Product ID label on each packaging.
F/FTP Cat.6A copper data cable 4x2xAWG23 500MHz FRNC CPR Dca
€348.45
(excl. VAT)
Copper data cable
Description
Electrically and mechanically stable Cat.6A data cable - exceeds the requirements of ISO/IEC 11801, EN 50288-5, IEC 61156-5 and EN 50174-2. Has very good EMC properties due to the combined pair and braided shielding. The data cable is compatible with all common connectors according to EN 50173 and ISO/IEC 11801.
Application
For the transmission of analog and digital signals within structured cabling in the backbon, riser and horizontal in the frequency range up to 500MHz. Suitable for applications up to class EA (500MHz). Tested for use in accordance with Euro Fire Class Dca.
Cable supports
IEEE 802.3: Ethernet 10Base-T; Fast Ethernet 100Base-T; Gigabit Ethernet 1000Base-T; 10GBase-T
IEEE 802.5: ISDN; FDDI; ATM; Cable sharing
IEEE 802.3at: PoE, PoE+
Standards
EN 50288-5-1; EN 50173; EN 50174-2; ISO/IEC 11801 2. Ausgabe; IEC 61156-5
Scope of delivery and package
Dependent on the length on disposable drums (500 m) or in portable boxes (305 m).Product ID label on each packaging.
F/UTP Cat.6A copper data cable 4x2xAWG23 500MHz FRNC CPR Dca
€486.45
(excl. VAT)
Copper data cable
Description
Electrically and mechanically stable Cat.6A data cable - exceeds the requirements of ISO/IEC 11801, EN 50288-5, IEC 61156-5 and EN 50174-2. Has decent EMC properties due to the combined pair and braided shielding. The data cable is compatible with all common connectors according to EN 50173 and ISO/IEC 11801.
Application
For the transmission of analog and digital signals within structured cabling in the backbon, riser and horizontal in the frequency range up to 500MHz. Suitable for applications up to class EA (500MHz). Tested for use in accordance with Euro Fire Class Dca.
Cable supports
IEEE 802.3: Ethernet 10Base-T; Fast Ethernet 100Base-T; Gigabit Ethernet 1000Base-T; 10GBase-T
IEEE 802.5: ISDN; FDDI; ATM; Cable sharing
IEEE 802.3at: PoE, PoE+
Standards
EN 50288-5-1; EN 50173; EN 50174-2; ISO/IEC 11801 2. Ausgabe; IEC 61156-5
Scope of delivery and package
Dependent on the length on disposable drums (500 m) or in portable boxes (305 m).Product ID label on each packaging.
Copper trunk cable shielded 6 channels Cat. 6 EA 10GBE, RJ45-connector/RJ45-connector, S/FTP 4x2, 50,0 m
€902.66
(excl. VAT)
PreCONNECT® COPPER ToR G2
Applications
IT room cabling within data centers
Data center and EDGE computing containers
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® COPPER ToR – Generation 2 is optimized for „top-of-the-rack“ „plug-and-play“ installations in data centers.
Connector- / jack type:
Both sides factory assembled with each six RJ45 Keystone jack modules Cat.6A fanout legs protected with overall copper braids.
Cable:
6-Channel S/FTP Cat.7
Six 4x2xAWG23/1 solid wire foil-screened pairs, below overall copper braid
FRNC-LSZH cable jacket
Color aqua
Diameter = 18 mm
Permanent link 10GBE class EA up to 80m
Connector legs:
FRNC-LSZH-Kabel, more cable specifications see data sheet.
Längendefinition:
The legs of the RJ45 jack modules are protected with overall copper braids, to guarantee the shielding and grounding of the entire trunk.The leg-lengths of the RJ45 Keystone jack modules are matched to the PreCONNECT® ToR G2 19” panel.
Scope of delivery and packaging:
„Plug-and Play” functionality and 100% factory measured, as cable ring in cardboard-box.
Benefits
Cost-effective through space and weight savings by the 24-pair cable, particularly appropriate for Top-of-the-Rack (ToR) cabling
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Copper trunk cable shielded 6 channels Cat. 6 EA 10GBE, RJ45-connector/RJ45-connector, S/FTP 4x2, 15,0 m
€368.42
(excl. VAT)
PreCONNECT® COPPER ToR G2
Applications
IT room cabling within data centers
Data center and EDGE computing containers
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® COPPER ToR – Generation 2 is optimized for „top-of-the-rack“ „plug-and-play“ installations in data centers.
Connector- / jack type:
Both sides factory assembled with each six RJ45 Keystone jack modules Cat.6A fanout legs protected with overall copper braids.
Cable:
6-Channel S/FTP Cat.7
Six 4x2xAWG23/1 solid wire foil-screened pairs, below overall copper braid
FRNC-LSZH cable jacket
Color aqua
Diameter = 18 mm
Permanent link 10GBE class EA up to 80m
Connector legs:
FRNC-LSZH-Kabel, more cable specifications see data sheet.
Längendefinition:
The legs of the RJ45 jack modules are protected with overall copper braids, to guarantee the shielding and grounding of the entire trunk.The leg-lengths of the RJ45 Keystone jack modules are matched to the PreCONNECT® ToR G2 19” panel.
Scope of delivery and packaging:
„Plug-and Play” functionality and 100% factory measured, as cable ring in cardboard-box.
Benefits
Cost-effective through space and weight savings by the 24-pair cable, particularly appropriate for Top-of-the-Rack (ToR) cabling
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
F/FTP Cat.6A copper data cable 4x2xAWG23 500MHz FRNC CPR Dca
€178.22
(excl. VAT)
Copper data cable
Description
Electrically and mechanically stable Cat.6A data cable - exceeds the requirements of ISO/IEC 11801, EN 50288-5, IEC 61156-5 and EN 50174-2. Has very good EMC properties due to the combined pair and braided shielding. The data cable is compatible with all common connectors according to EN 50173 and ISO/IEC 11801.
Application
For the transmission of analog and digital signals within structured cabling in the backbon, riser and horizontal in the frequency range up to 500MHz. Suitable for applications up to class EA (500MHz). Tested for use in accordance with Euro Fire Class Dca.
Cable supports
IEEE 802.3: Ethernet 10Base-T; Fast Ethernet 100Base-T; Gigabit Ethernet 1000Base-T; 10GBase-T
IEEE 802.5: ISDN; FDDI; ATM; Cable sharing
IEEE 802.3at: PoE, PoE+
Standards
EN 50288-5-1; EN 50173; EN 50174-2; ISO/IEC 11801 2. Ausgabe; IEC 61156-5
Scope of delivery and package
Dependent on the length on disposable drums (500 m) or in portable boxes (305 m).Product ID label on each packaging.
F/UTP Cat.6A copper data cable 4x2xAWG23 500MHz FRNC CPR Dca
€178.18
(excl. VAT)
Copper data cable
Description
Electrically and mechanically stable Cat.6A data cable - exceeds the requirements of ISO/IEC 11801, EN 50288-5, IEC 61156-5 and EN 50174-2. Has decent EMC properties due to the combined pair and braided shielding. The data cable is compatible with all common connectors according to EN 50173 and ISO/IEC 11801.
Application
For the transmission of analog and digital signals within structured cabling in the backbon, riser and horizontal in the frequency range up to 500MHz. Suitable for applications up to class EA (500MHz). Tested for use in accordance with Euro Fire Class Dca.
Cable supports
IEEE 802.3: Ethernet 10Base-T; Fast Ethernet 100Base-T; Gigabit Ethernet 1000Base-T; 10GBase-T
IEEE 802.5: ISDN; FDDI; ATM; Cable sharing
IEEE 802.3at: PoE, PoE+
Standards
EN 50288-5-1; EN 50173; EN 50174-2; ISO/IEC 11801 2. Ausgabe; IEC 61156-5
Scope of delivery and package
Dependent on the length on disposable drums (500 m) or in portable boxes (305 m).Product ID label on each packaging.
Copper trunk cable shielded 6 channels Cat. 6 EA 10GBE, RJ45-connector/RJ45-connector, S/FTP 4x2, 10,0 m
€292.07
(excl. VAT)
PreCONNECT® COPPER ToR G2
Applications
IT room cabling within data centers
Data center and EDGE computing containers
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® COPPER ToR – Generation 2 is optimized for „top-of-the-rack“ „plug-and-play“ installations in data centers.
Connector- / jack type:
Both sides factory assembled with each six RJ45 Keystone jack modules Cat.6A fanout legs protected with overall copper braids.
Cable:
6-Channel S/FTP Cat.7
Six 4x2xAWG23/1 solid wire foil-screened pairs, below overall copper braid
FRNC-LSZH cable jacket
Color aqua
Diameter = 18 mm
Permanent link 10GBE class EA up to 80m
Connector legs:
FRNC-LSZH-Kabel, more cable specifications see data sheet.
Längendefinition:
The legs of the RJ45 jack modules are protected with overall copper braids, to guarantee the shielding and grounding of the entire trunk.The leg-lengths of the RJ45 Keystone jack modules are matched to the PreCONNECT® ToR G2 19” panel.
Scope of delivery and packaging:
„Plug-and Play” functionality and 100% factory measured, as cable ring in cardboard-box.
Benefits
Cost-effective through space and weight savings by the 24-pair cable, particularly appropriate for Top-of-the-Rack (ToR) cabling
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Copper trunk cable shielded 6 channels Cat. 6 EA 10GBE, RJ45-connector/RJ45-connector, S/FTP 4x2, 20,0 m
€444.73
(excl. VAT)
PreCONNECT® COPPER ToR G2
Applications
IT room cabling within data centers
Data center and EDGE computing containers
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® COPPER ToR – Generation 2 is optimized for „top-of-the-rack“ „plug-and-play“ installations in data centers.
Connector- / jack type:
Both sides factory assembled with each six RJ45 Keystone jack modules Cat.6A fanout legs protected with overall copper braids.
Cable:
6-Channel S/FTP Cat.7
Six 4x2xAWG23/1 solid wire foil-screened pairs, below overall copper braid
FRNC-LSZH cable jacket
Color aqua
Diameter = 18 mm
Permanent link 10GBE class EA up to 80m
Connector legs:
FRNC-LSZH-Kabel, more cable specifications see data sheet.
Längendefinition:
The legs of the RJ45 jack modules are protected with overall copper braids, to guarantee the shielding and grounding of the entire trunk.The leg-lengths of the RJ45 Keystone jack modules are matched to the PreCONNECT® ToR G2 19” panel.
Scope of delivery and packaging:
„Plug-and Play” functionality and 100% factory measured, as cable ring in cardboard-box.
Benefits
Cost-effective through space and weight savings by the 24-pair cable, particularly appropriate for Top-of-the-Rack (ToR) cabling
Fast and safe installation trough factory assembled Plug & Play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components