SMAP-G2, 1HU, labeling field for 19" 1 HU panels Anwendungsbereiche In front of 19” 1HU panels and hardware mountable. To be filled with your individual text. Eigenschaften Suitable for all Rosenberger OSI and the most commercially available 19” 1HU panels and hardware Lieferumfang und Verpackung: Packed in a carton.

Fiber Optic Measurement CablesApplicationsPatch cables suitable for measurement applications in the laboratory or in the field.PropertiesReliable measurements with excellent repeatability thanks to measurement cables with precisely specified connectors.Measurement cable connectors that conform to particularly low tolerances.Connectors with wear-resistant ceramic ferrules.Singlemode: The limit value for the eccentricity of the fiber core is 0.3 µm and the maximum permitted value for Apex offset is 30 µm.Scope of delivery and packaging:With individually documented report. To enable us to guarantee the outstandingly low tolerances of our measurement cables, these pass through several exceptionally demanding test procedures. The eccentricity measurement device is used to check whether the fiber core is located exactly in the center of the ferrule. The quality requirements permit a maximum eccentricity of 0.3 µm. The interferometer is used to measure the geometry of the ferrule endface, which is then displayed using a range of imaging methods. Here again, only the tiniest tolerances are permitted.

19" Cable Manager horizontalApplicationsManagement system for patch distributor and equipment rack in data center.Cable managers are very user-friendly due to:1.) The covers which can be opened in both directions and are completely removable-Covers which can be opened in both directions and are completely removable.2.) The L-fingers rounded everywhere:The cables are not damaged by sharp edges during installation and deinstallationThe cables can be easily and safely installed and uninstalled in the Cable ManagerThe L-fingers hold the cables in the finger slots when working with open or removed covers, the cables do not fall out3.) The excess cable lengths can either be accommodated vertically in the cable manager itself, or in optional cable excess length channels on the backs of the cable managers vertically.PropertiesBody and cover:Aluminium, powder-coated RAL 9005 black matt structureL-finger and cover joint:Polyamide PA, deep black matt, halogen-free, flame retardant UL94-V0L-fingers are rounded everywhere and have no sharp edgesL-fingers are very robust and break-proof Scope of delivery and packaging:Packed in a carton.

Fiber Optic Patch CordsApplicationsPatch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.PropertiesConnector types:According to IEC 61754-x, for more connector specifications see data sheet.SC: IEC 61754-4MTP®: IEC 61754-7E2000®: IEC 61754-15LC: IEC 61754-20Polarity:Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173 Half duplex cables with duplex/simplex connectors „uncrossed“ Duplex cables with simplex connectors on both sides „uncrossed“Fiber types:According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1Cable types:FRNC-LSZH cable, for more cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m