Fiber optic patch cord 8 fibers singlemode OS2, MTP®-APC-f/ MTP®-APC-f, I-F(ZN)H rund 3,0 mm
High quality fiber optic fiber patch cord 1 PSM4/DR4 channel / 8 fibers with MTP®-APC female connector, polarity 1 to 12 type B not changeable, FRNC indoor cable round 3,0 mm, I-F(ZN)H 8E9/125µ yellow, G657.A1 bend insensitive.
€57.07
*
(excl. VAT)
Delivery time within 1 weeks
Product number:
03MTPMTPG657A1008A01
PreCONNECT® OCTO MTP® Patch Cords
Applications
MTP® (MPO) based Data Center cabling with 8 fibers per MTP® channel.
Appropriate for parallel optics applications:
- 40/100/200 GBASE-SR4
- 400GBASE-SR4.2 BiDi
- 4x16 und 4x32 GFC
- 100G PSM4
- 4x10 GBASE-LR
- 200GBASE-DR4
- 400GBASE-DR4
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
Connector type:
- OCTO Patch Cords: MTP® 12 fiber female
Polarity:
- OCTO Patch Cords: TIA Method B „1 to 12“
Fiber types:
- Multimode OM4 bend-insensitive
- Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Cable types:
FRNC-LSZH cable, for further cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attention report according to IEC 61300-3-4, measurement values on request or via website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging. Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
| Allgemein: | General |
|---|---|
| Betriebstemperatur: | -10°C to +60°C |
| Faser: | |
| Kabel: | |
| Kabel-Mantelmaterial: | FRNC-LSZH |
| Kern- / Manteldurchmesser: | 9/125µm |
| Polarität: | type B (1 to 12) |
| Produktlinie: | PreCONNECT® OCTO |
| Stecker: | side A / side B |
| cable type: | Single jacket round |
| channels/fibers: | 1 PSM4/DR4 / 8 |
| connector types: | MTP®-APC female / MTP®-APC female |
| fiber type: | singlemode bend insensitive |
| Produktsteckbrief_760600 |
|
pdf
|
2987543 KB
|
| Productprofile_760600 |
|
pdf
|
2986006 KB
|
Login
Lässt sich verbinden mit:
Fiber optic trunk cable breakout 32 fibers singlemode OS2, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)HH
€466.17
(excl. VAT)
PreCONNECT® OCTO MTP® Breakout Trunk cable
Applications
MTP® (MPO) based data center cabling with 8 fibers per MTP® channel.
Optimized for parallel optics MPO 4+4 fiber applications:
40/100/200 GBASE-SR4
400GBASE-SR4.2 BiDi
4x16, 4x32 and 4x64 GFC
100GBASE DR4/PSM4
200GBASE-DR4
400GBASE-DR4
4x10 GBASE-LR
Easy migration to higher speed applications.
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO Breakout Trunk cables with I-F(ZN)HH breakout cables:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The trunk connector legs are fitting for the 19“ panel systems and are packed in non-pull resistant dust-proof foil tubes. On request with tensile strength, crush resistant, kink and torsion resistant, installation tubes deliverable.
Connector type:
OCTO Trunk cables: MTP® OCTO 4+4 fiber male
Polarity:
OCTO Trunk cables: TIA Method B „1 to 12“
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® square-interfaces.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum
Insertion loss and return loss measured acc. to IEC 61300-3-4, method B, MM 850/1300nm and SM 1310/1550nm, with measurement protocol
Product label with serial number at both sides
Benefits
MTP® cabling system perfectly fitting for SR4 and DR4/PSM4 applications
Cost reduction through the only for SR4 and DR4/PSM4 needed 8 fibers instead of the so far usual 12 are in one MTP® channel
Fast and safe installation trough factory assembled plug & play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Fiber optic trunk cable breakout 96 fibers singlemode OS2, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)HH
€1,292.06
(excl. VAT)
PreCONNECT® OCTO MTP® Breakout Trunk cable
Applications
MTP® (MPO) based data center cabling with 8 fibers per MTP® channel.
Optimized for parallel optics MPO 4+4 fiber applications:
40/100/200 GBASE-SR4
400GBASE-SR4.2 BiDi
4x16, 4x32 and 4x64 GFC
100GBASE DR4/PSM4
200GBASE-DR4
400GBASE-DR4
4x10 GBASE-LR
Easy migration to higher speed applications.
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO Breakout Trunk cables with I-F(ZN)HH breakout cables:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The trunk connector legs are fitting for the 19“ panel systems and are packed in non-pull resistant dust-proof foil tubes. On request with tensile strength, crush resistant, kink and torsion resistant, installation tubes deliverable.
Connector type:
OCTO Trunk cables: MTP® OCTO 4+4 fiber male
Polarity:
OCTO Trunk cables: TIA Method B „1 to 12“
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® square-interfaces.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum
Insertion loss and return loss measured acc. to IEC 61300-3-4, method B, MM 850/1300nm and SM 1310/1550nm, with measurement protocol
Product label with serial number at both sides
Benefits
MTP® cabling system perfectly fitting for SR4 and DR4/PSM4 applications
Cost reduction through the only for SR4 and DR4/PSM4 needed 8 fibers instead of the so far usual 12 are in one MTP® channel
Fast and safe installation trough factory assembled plug & play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Fiber optic trunk cable breakout 8 fibers singlemode OS2, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)H(ZN)H
€160.84
(excl. VAT)
PreCONNECT® OCTO MTP® Breakout Trunk cable
Applications
MTP® (MPO) based data center cabling with 8 fibers per MTP® channel.
Optimized for parallel optics MPO 4+4 fiber applications:
40/100/200 GBASE-SR4
400GBASE-SR4.2 BiDi
4x16, 4x32 and 4x64 GFC
100GBASE DR4/PSM4
200GBASE-DR4
400GBASE-DR4
4x10 GBASE-LR
Easy migration to higher speed applications.
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO Breakout Trunk cables with I-F(ZN)HH breakout cables:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The trunk connector legs are fitting for the 19“ panel systems and are packed in non-pull resistant dust-proof foil tubes. On request with tensile strength, crush resistant, kink and torsion resistant, installation tubes deliverable.
Connector type:
OCTO Trunk cables: MTP® OCTO 4+4 fiber male
Polarity:
OCTO Trunk cables: TIA Method B „1 to 12“
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® square-interfaces.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum
Insertion loss and return loss measured acc. to IEC 61300-3-4, method B, MM 850/1300nm and SM 1310/1550nm, with measurement protocol
Product label with serial number at both sides
Benefits
MTP® cabling system perfectly fitting for SR4 and DR4/PSM4 applications
Cost reduction through the only for SR4 and DR4/PSM4 needed 8 fibers instead of the so far usual 12 are in one MTP® channel
Fast and safe installation trough factory assembled plug & play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
Fiber optic trunk cable breakout 64 fibers singlemode OS2, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)HH
€873.95
(excl. VAT)
PreCONNECT® OCTO MTP® Breakout Trunk cable
Applications
MTP® (MPO) based data center cabling with 8 fibers per MTP® channel.
Optimized for parallel optics MPO 4+4 fiber applications:
40/100/200 GBASE-SR4
400GBASE-SR4.2 BiDi
4x16, 4x32 and 4x64 GFC
100GBASE DR4/PSM4
200GBASE-DR4
400GBASE-DR4
4x10 GBASE-LR
Easy migration to higher speed applications.
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO Breakout Trunk cables with I-F(ZN)HH breakout cables:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The trunk connector legs are fitting for the 19“ panel systems and are packed in non-pull resistant dust-proof foil tubes. On request with tensile strength, crush resistant, kink and torsion resistant, installation tubes deliverable.
Connector type:
OCTO Trunk cables: MTP® OCTO 4+4 fiber male
Polarity:
OCTO Trunk cables: TIA Method B „1 to 12“
Fiber types:
Multimode OM4 bend-insensitive
Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® square-interfaces.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum
Insertion loss and return loss measured acc. to IEC 61300-3-4, method B, MM 850/1300nm and SM 1310/1550nm, with measurement protocol
Product label with serial number at both sides
Benefits
MTP® cabling system perfectly fitting for SR4 and DR4/PSM4 applications
Cost reduction through the only for SR4 and DR4/PSM4 needed 8 fibers instead of the so far usual 12 are in one MTP® channel
Fast and safe installation trough factory assembled plug & play systematic
Highest quality and cost-efficiency through factory assembling
PreCONNECT® cabling systems consist of perfectly harmonized modular single components
SMAP-G2 HD 1/3 HU part front plate with 6/6 width partition, MTPD Singlemode APC green Typ A
€39.40
(excl. VAT)
SMAP-G2 HD 1/3 HU 1/6 part front plates with matrix numbering
Applications
SMAP-G2 HD empty panels with 6/6 width partition
Properties
The PFPs are toolless inserted from the front side and fixed with quick fasteners.
By this design they can be pulled out to the front for maintenance.
The numbering of the part front plates PFP is a modular numerical matrix.
The LC-Duplex and MTP® ports within the PFPs have a fixed 1 to 4 labeling.
The PFPs can be numbered with their positions they have within the panels with the exchangeable numbering clips the panels are shipped with.
Material and color:
Steel powder coated RAL9005 black
Adapter types per PFP:
1 LC8 = 4 LC-Duplex ports
2 MTP®-Duplex = 4 MTP® ports
Adapter variants:
LC8: OM4 violet, SM blue
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
Scope of delivery and packaging:
Part front plate fully factory-assembled in carton