SMAP-G2, 1HU, labeling field for 19" 1 HU panels Anwendungsbereiche In front of 19” 1HU panels and hardware mountable. To be filled with your individual text. Eigenschaften Suitable for all Rosenberger OSI and the most commercially available 19” 1HU panels and hardware Lieferumfang und Verpackung: Packed in a carton.

Fiber Optic Measurement CablesApplicationsPatch cables suitable for measurement applications in the laboratory or in the field.PropertiesReliable measurements with excellent repeatability thanks to measurement cables with precisely specified connectors.Measurement cable connectors that conform to particularly low tolerances.Connectors with wear-resistant ceramic ferrules.Singlemode: The limit value for the eccentricity of the fiber core is 0.3 µm and the maximum permitted value for Apex offset is 30 µm.Scope of delivery and packaging:With individually documented report. To enable us to guarantee the outstandingly low tolerances of our measurement cables, these pass through several exceptionally demanding test procedures. The eccentricity measurement device is used to check whether the fiber core is located exactly in the center of the ferrule. The quality requirements permit a maximum eccentricity of 0.3 µm. The interferometer is used to measure the geometry of the ferrule endface, which is then displayed using a range of imaging methods. Here again, only the tiniest tolerances are permitted.

Fiber optic universal cable with stranded loose tubes Description Dry and metal-free fiber optic universal cable with excellent bending properties for laying both indoors and outdoors. The cable is longitudinally watertight, has a non-metallic rodent protection and is resistant to increased tensile forces.Two ripcords make it easy to open the cable jacket.The cable is for fixed installation in cable ducts, on cable racks or in cable conduits. Application The fiber optic universal cable can be laid inside buildings in cable ducts and shafts in the riser area as well as on the floor and outside in cable ducts. The cable is often used in structured cabling within buildings and for connecting buildings (campus) according to ISO/IEC 11801. Standards ISO/IEC 11801, IEC 60794-2-20; EN 50575 : 2014 + A1 : 2016,RoHS Compliant (RoHS 2002/95/EG) Scope of delivery and package Dependent on the length as disposable drum (wood or cardboard).Product ID label on each packaging.

19" Patch Cord GuideApplicationsCable management in patch distributor and device rack.PropertiesMaterial und color of panel:Sheet steel powder-coated RAL 7035 light greyMaterial und color of brackets: Polyamide PA, blackScope of delivery and packaging:Packed in carton.

Fiber Optic Patch Cords Applications Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request. Properties Connector types: According to IEC 61754-x, for more connector specifications see data sheet. SC: IEC 61754-4 MTP®: IEC 61754-7 E2000®: IEC 61754-15 LC: IEC 61754-20 Polarity: Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173 Half duplex cables with duplex/simplex connectors „uncrossed“ Duplex cables with simplex connectors on both sides „uncrossed“ Fiber types: According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet. OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1 OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1 OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1 OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1 Cable types: FRNC-LSZH cable, for more cable specifications see data sheet. Scope of delivery and packaging: Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length. Length tolerance: Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m