Copper data cable Description Electrically and mechanically stable Cat.6A data cable - exceeds the requirements of ISO/IEC 11801, EN 50288-5, IEC 61156-5 and EN 50174-2. Has decent EMC properties due to the combined pair and braided shielding. The data cable is compatible with all common connectors according to EN 50173 and ISO/IEC 11801. Application For the transmission of analog and digital signals within structured cabling in the backbon, riser and horizontal in the frequency range up to 500MHz. Suitable for applications up to class EA (500MHz). Tested for use in accordance with Euro Fire Class Dca. Cable supports IEEE 802.3: Ethernet 10Base-T; Fast Ethernet 100Base-T; Gigabit Ethernet 1000Base-T; 10GBase-T IEEE 802.5: ISDN; FDDI; ATM; Cable sharing IEEE 802.3at: PoE, PoE+ Standards EN 50288-5-1; EN 50173; EN 50174-2; ISO/IEC 11801 2. Ausgabe; IEC 61156-5 Scope of delivery and package Dependent on the length on disposable drums (500 m) or in portable boxes (305 m).Product ID label on each packaging.

PreCONNECT® TRUNK MULTIJUMPERApplicationsCabling of large switches and floor-standing IT hardware within data centers, to represent their ports in a patch location.Trunk Multijumper up to 144 fibers per trunkCost and attenuation optimizedFocused on a practical and necessary approachMore information about the different applications can be found in the separates product information.PropertiesPreCONNECT® MULTIJUMPER Trunk cable:Cable ends are molded in distribution heads and assembled with „variable“ long or "stepped" connector legs.The PreCONNECT® cable divider is a mechanically and thermally robust and splice-less cable divider for fiber separation of loose tube cables. With its integrated PreCONNECT® square interface, the cable divider can be tool-less hooked into PreCONNECT® panels for tensile and torsion resistant fixing of the trunk cables.Installation protection:The connector legs and cable dividers are packed in with a non pull resistant dustproof foil tube. Stepped connector legs can be packed optionally in 600 N tensile strength, crush resistant, kink and torsion resistant, installation tubes.Connector types:According to IEC 61754-x, for more connector specifications see data sheet.SC: IEC 61754-4MTP®: IEC 61754-7E2000®: IEC 61754-15LC: IEC 61754-20Polarity:The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.Fiber types:According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1Cable type:FRNC-LSZH cable, for more cable specifications see data sheet.Length definition:Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.Scope of delivery and packaging:Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both sides of cable ends for network documentation, Product ID label on each packaging, including installation manual available in any standard length.BenefitsCost reduction through direct attach of the IT Hardware Transceivers to the TMJ connector legsMost cost-effective solution for trunks up to 24 fibers and short lengthsAttenuation reduction through the saving of one connection in the transmission channelApplication specific individually configurableFast and safe installation trough factory assembled Plug & Play systematicHighest quality and cost-efficiency through factory assemblingPreCONNECT® cabling systems consist of perfectly harmonized modular single components.

PreCONNECT® TRUNK MULTIJUMPERApplicationsCabling of large switches and floor-standing IT hardware within data centers, to represent their ports in a patch location.Trunk Multijumper up to 144 fibers per trunkCost and attenuation optimizedFocused on a practical and necessary approachMore information about the different applications can be found in the separates product information.PropertiesPreCONNECT® MULTIJUMPER Trunk cable:Cable ends are molded in distribution heads and assembled with „variable“ long or "stepped" connector legs.The PreCONNECT® cable divider is a mechanically and thermally robust and splice-less cable divider for fiber separation of loose tube cables. With its integrated PreCONNECT® square interface, the cable divider can be tool-less hooked into PreCONNECT® panels for tensile and torsion resistant fixing of the trunk cables.Installation protection:The connector legs and cable dividers are packed in with a non pull resistant dustproof foil tube. Stepped connector legs can be packed optionally in 600 N tensile strength, crush resistant, kink and torsion resistant, installation tubes.Connector types:According to IEC 61754-x, for more connector specifications see data sheet.SC: IEC 61754-4MTP®: IEC 61754-7E2000®: IEC 61754-15LC: IEC 61754-20Polarity:The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.Fiber types:According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1Cable type:FRNC-LSZH cable, for more cable specifications see data sheet.Length definition:Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.Scope of delivery and packaging:Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both sides of cable ends for network documentation, Product ID label on each packaging, including installation manual available in any standard length.BenefitsCost reduction through direct attach of the IT Hardware Transceivers to the TMJ connector legsMost cost-effective solution for trunks up to 24 fibers and short lengthsAttenuation reduction through the saving of one connection in the transmission channelApplication specific individually configurableFast and safe installation trough factory assembled Plug & Play systematicHighest quality and cost-efficiency through factory assemblingPreCONNECT® cabling systems consist of perfectly harmonized modular single components.