Fiber optic trunk cable multijumper 144 fibers singlemode OS2, E2000®-APC/E2000®-APC, U-DQ(ZN)BH
€10,182.16 (incl. 19% VAT)
PreCONNECT® TRUNK MULTIJUMPER
Applications
Cabling of large switches and floor-standing IT hardware within data centers, to represent their ports in a patch location.
- Trunk Multijumper up to 144 fibers per trunk
- Cost and attenuation optimized
- Focused on a practical and necessary approach
More information about the different applications can be found in the separates product information.
Properties
PreCONNECT® MULTIJUMPER Trunk cable:
Cable ends are molded in distribution heads and assembled with „variable“ long or "stepped" connector legs.
The PreCONNECT® cable divider is a mechanically and thermally robust and splice-less cable divider for fiber separation of loose tube cables. With its integrated PreCONNECT® square interface, the cable divider can be tool-less hooked into PreCONNECT® panels for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The connector legs and cable dividers are packed in with a non pull resistant dustproof foil tube. Stepped connector legs can be packed optionally in 600 N tensile strength, crush resistant, kink and torsion resistant, installation tubes.
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
- SC: IEC 61754-4
- MTP®: IEC 61754-7
- E2000®: IEC 61754-15
- LC: IEC 61754-20
Polarity:
The connector legs are alphanumerically uniquely coded. The standard polarity is „channel-wise crossed“ (pairwise flipped) for full-duplex transmission systems – A1 to B1, A2 to B2, etc. On request „uncrossed“ deliverable.
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
- OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
- OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
- OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
- OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable type:
FRNC-LSZH cable, for more cable specifications see data sheet.
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® cable dividers.
Scope of delivery and packaging:
Dependent on the length as cable ring or on cardboard or wooden drum, 100% IL factory measured with measurement protocol, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number on both sides of cable ends for network documentation, Product ID label on each packaging, including installation manual available in any standard length.
Benefits
- Cost reduction through direct attach of the IT Hardware Transceivers to the TMJ connector legs
- Most cost-effective solution for trunks up to 24 fibers and short lengths
- Attenuation reduction through the saving of one connection in the transmission channel
- Application specific individually configurable
- Fast and safe installation trough factory assembled Plug & Play systematic
- Highest quality and cost-efficiency through factory assembling
- PreCONNECT® cabling systems consist of perfectly harmonized modular single components.
| Product line | PreCONNECT® TRUNK MULTIJUMPER |
| General | General |
| Operating temperature | -10°C to +60°C |
| Polarity | crossed channel-wise |
| Number of channels / fibers | 72 / 144 |
| Connector | side A / side B |
| Connector type | E2000®-APC HRL / E2000®-APC HRL |
| Connector structure | Simplex / Simplex |
| Mating cycles | 500 / 500 |
| Connector color | green / green |
| Connector polarity changeable | - / - |
| Insertion loss IL | < 0,15 dB / < 0,15 dB |
| Return loss RL | > 80 dB / > 80 dB |
| Cable | |
| Cable type | U-DQ(ZN)BH nxm... |
| Cable sheathing material | FRNC |
| CPR-Brandklasse der Kabelmeterware | Eca |
| Cable tensile strength / crush resistance | 6000 N / 3000 N/dm |
| Cable diameter / fire load | 17,7 mm / 4,5 MJ/m |
| Cable color | yellow |
| Bending radius min. installed / installation | 265 mm / 355 mm |
| Fiber | |
| Fiber type | singlemode bend insensitive |
| Core / cladding diameter | 9/125µ |
| ITU Standard | G.657.A1 |
| IEC Standard | 60793-2-50 type B1.3 |
| EN Standard | 50173-1 OS2 |
| Max. link length | |
| 500 m | 40G) PSM4; 100G) PSM4, DR; 200G) DR4; 400G) DR4 |
| 2 km | 40G) FR; 50G) FR; 100G) 10x10, CWDM4, CLR4, 100G-LR; 200G) FR4; 400G) FR8, 400G-FR4 |
| 10 km | 25G) LR, EPON/bidi Access; 40G) LR4; 50G) LR, EPON/bidi Access; 100G) LR4, 4WDM-10, 100G-LR; 200G) LR4; 400G) LR8, 400G-LR4 |
| 20 km | 25G) EPON/bidi Access; 50G) EPON/bidi Access; 100G) 4WDM-20 |
| 40 km | 25G) ER, bidi Access; 50G) bidi Access, ER; 100G) ER4, 4WDM-40; 200G) ER4; 400G) ER8 |
| 80 km | 100G) ZR; 400G) ZR |
