Fiber Optic Patch Cords
Applications
Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.
Properties
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173
Half duplex cables with duplex/simplex connectors „uncrossed“
Duplex cables with simplex connectors on both sides „uncrossed“
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable types:
FRNC-LSZH cable, for more cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber Optic Patch Cords
Applications
Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.
Properties
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173
Half duplex cables with duplex/simplex connectors „uncrossed“
Duplex cables with simplex connectors on both sides „uncrossed“
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable types:
FRNC-LSZH cable, for more cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber Optic Patch Cords
Applications
Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.
Properties
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173
Half duplex cables with duplex/simplex connectors „uncrossed“
Duplex cables with simplex connectors on both sides „uncrossed“
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable types:
FRNC-LSZH cable, for more cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber Optic Patch CordsApplicationsPatch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.PropertiesConnector types:According to IEC 61754-x, for more connector specifications see data sheet.SC: IEC 61754-4MTP®: IEC 61754-7E2000®: IEC 61754-15LC: IEC 61754-20Polarity:Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173 Half duplex cables with duplex/simplex connectors „uncrossed“ Duplex cables with simplex connectors on both sides „uncrossed“Fiber types:According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1Cable types:FRNC-LSZH cable, for more cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber Optic Patch CordsApplicationsPatch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.PropertiesConnector types:According to IEC 61754-x, for more connector specifications see data sheet.SC: IEC 61754-4MTP®: IEC 61754-7E2000®: IEC 61754-15LC: IEC 61754-20Polarity:Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173 Half duplex cables with duplex/simplex connectors „uncrossed“ Duplex cables with simplex connectors on both sides „uncrossed“Fiber types:According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1Cable types:FRNC-LSZH cable, for more cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber Optic Patch Cords
Applications
Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.
Properties
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173
Half duplex cables with duplex/simplex connectors „uncrossed“
Duplex cables with simplex connectors on both sides „uncrossed“
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable types:
FRNC-LSZH cable, for more cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber Optic Patch Cords
Applications
Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.
Properties
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173
Half duplex cables with duplex/simplex connectors „uncrossed“
Duplex cables with simplex connectors on both sides „uncrossed“
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable types:
FRNC-LSZH cable, for more cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber Optic Patch Cords
Applications
Patch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.
Properties
Connector types:
According to IEC 61754-x, for more connector specifications see data sheet.
SC: IEC 61754-4
MTP®: IEC 61754-7
E2000®: IEC 61754-15
LC: IEC 61754-20
Polarity:
Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173
Half duplex cables with duplex/simplex connectors „uncrossed“
Duplex cables with simplex connectors on both sides „uncrossed“
Fiber types:
According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.
OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1
OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1
OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1
OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1
Cable types:
FRNC-LSZH cable, for more cable specifications see data sheet.
Scope of delivery and packaging:
Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.
Length tolerance:
Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber Optic Patch CordsApplicationsPatch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.PropertiesConnector types:According to IEC 61754-x, for more connector specifications see data sheet.SC: IEC 61754-4MTP®: IEC 61754-7E2000®: IEC 61754-15LC: IEC 61754-20Polarity:Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173 Half duplex cables with duplex/simplex connectors „uncrossed“ Duplex cables with simplex connectors on both sides „uncrossed“Fiber types:According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1Cable types:FRNC-LSZH cable, for more cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Fiber Optic Patch CordsApplicationsPatch cords suitable for cabling in data centers and office buildings. Patch cords for mobile communications, industrial application available on request.PropertiesConnector types:According to IEC 61754-x, for more connector specifications see data sheet.SC: IEC 61754-4MTP®: IEC 61754-7E2000®: IEC 61754-15LC: IEC 61754-20Polarity:Full duplex cables with duplex connectors on both sides “crossed” in according with ISO/IEC 11801 und EN 50173 Half duplex cables with duplex/simplex connectors „uncrossed“ Duplex cables with simplex connectors on both sides „uncrossed“Fiber types:According to ISO/IEC 11801, EN 50173-1, IEC 60793-2-x and ITUG65x, for more fiber specifications see data sheet.OM3: IEC 60793-2-10 type A1a.2, ITU G.651.1OM4: IEC 60793-2-10 type A1a.3, ITU G.651.1OM5: IEC 60793-2-10 type A1a.4, ITU G.651.1OS2: IEC 60793-2-50 type B1.3, ITU G.657.A1Cable types:FRNC-LSZH cable, for more cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attenuation report according to IEC 61300-3-4, measurement values on request or via our website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging.Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Copper Patch Cords unshielded
Applications
Patch cords suitable for cabling in data centers and office buildings.
Properties
RJ45 patch cable unshielded Cat. 6 ISO/IEC.
Connector type:
RJ45 connector (8/8) unshielded
Cable:
U/UTP, flex 4 PiMF AWG24/7 Cat.6
FRNC-LSZH cable jacket
Color grey
Scope of delivery and packaging:
Dust protected and individually packed in foil bags, available in any standard length.
Copper Patch Cords shielded
Applications
Patch cords suitable for cabling in data centers and office buildings.
Properties
GHMT PVP certified RJ45 patch cable shielded Cat. 6A ISO/IEC.
Connector type:
RJ45 connector (8/8) shielded
2-component boots with latch protection and protective cap
Cable:
S/FTP, flex 4 PiMF AWG27/7 Cat.7
FRNC-LSZH cable jacket
Color grey
Diameter 5,7 mm
Scope of delivery and packaging:
Dust protected and individually packed in foil bags, available in any standard length.
Copper Patch Cords shielded
Applications
Patch cords suitable for cabling in data centers and office buildings.
Properties
GHMT PVP certified RJ45 patch cable shielded Cat. 6A ISO/IEC.
Connector type:
RJ45 connector (8/8) shielded
2-component boots with latch protection and protective cap
Cable:
S/FTP, flex 4 PiMF AWG27/7 Cat.7
FRNC-LSZH cable jacket
Color grey
Diameter 5,7 mm
Scope of delivery and packaging:
Dust protected and individually packed in foil bags, available in any standard length.
Copper Patch Cords shielded
Applications
Patch cords suitable for cabling in data centers and office buildings.
Properties
GHMT PVP certified RJ45 patch cable shielded Cat. 6A ISO/IEC.
Connector type:
RJ45 connector (8/8) shielded
2-component boots with latch protection and protective cap
Cable:
S/FTP, flex 4 PiMF AWG27/7 Cat.7
FRNC-LSZH cable jacket
Color grey
Diameter 5,7 mm
Scope of delivery and packaging:
Dust protected and individually packed in foil bags, available in any standard length.
Copper Patch Cords shielded
Applications
Patch cords suitable for cabling in data centers and office buildings.
Properties
GHMT PVP certified RJ45 patch cable shielded Cat. 6A ISO/IEC.
Connector type:
RJ45 connector (8/8) shielded
2-component boots with latch protection and protective cap
Cable:
S/FTP, flex 4 PiMF AWG27/7 Cat.7
FRNC-LSZH cable jacket
Color grey
Diameter 5,7 mm
Scope of delivery and packaging:
Dust protected and individually packed in foil bags, available in any standard length.
SMAP-G2 HD 1/3 HU 1/6 blind part front plate
Applications
For installation in SMAP-G2 HD empty panels with 6/6 width partition
Properties
The PFPs are toolless inserted from the front side and fixed with quick fasteners.
By this design they can be pulled out to the front for maintenance.
The numbering of the part front plates PFP is a modular numerical matrix.
The PFPs can be numbered with their positions they have within the panels with the exchangeable numbering clips the panels are shipped with.
Material and color:
Steel powder coated RAL9005 black
Scope of delivery and packaging:
Blind part front plate fully factory-assembled in carton
SMAP-G2 HD 1/3 HU 1/6 part front plates with matrix numbering
Applications
SMAP-G2 HD empty panels with 6/6 width partition
Properties
The PFPs are toolless inserted from the front side and fixed with quick fasteners.
By this design they can be pulled out to the front for maintenance.
The numbering of the part front plates PFP is a modular numerical matrix.
The LC-Duplex and MTP® ports within the PFPs have a fixed 1 to 4 labeling.
The PFPs can be numbered with their positions they have within the panels with the exchangeable numbering clips the panels are shipped with.
Material and color:
Steel powder coated RAL9005 black
Adapter types per PFP:
1 LC8 = 4 LC-Duplex ports
2 MTP®-Duplex = 4 MTP® ports
Adapter variants:
LC8: OM4 violet, SM blue
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
Scope of delivery and packaging:
Part front plate fully factory-assembled in carton
SMAP-G2 HD 1/3 HU 1/6 part front plates with matrix numbering
Applications
SMAP-G2 HD empty panels with 6/6 width partition
Properties
The PFPs are toolless inserted from the front side and fixed with quick fasteners.
By this design they can be pulled out to the front for maintenance.
The numbering of the part front plates PFP is a modular numerical matrix.
The LC-Duplex and MTP® ports within the PFPs have a fixed 1 to 4 labeling.
The PFPs can be numbered with their positions they have within the panels with the exchangeable numbering clips the panels are shipped with.
Material and color:
Steel powder coated RAL9005 black
Adapter types per PFP:
1 LC8 = 4 LC-Duplex ports
2 MTP®-Duplex = 4 MTP® ports
Adapter variants:
LC8: OM4 violet, SM blue
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
Scope of delivery and packaging:
Part front plate fully factory-assembled in carton
SMAP-G2 HD 1/3 HU 1/6 part front plates with matrix numbering
Applications
SMAP-G2 HD empty panels with 6/6 width partition
Properties
The PFPs are toolless inserted from the front side and fixed with quick fasteners.
By this design they can be pulled out to the front for maintenance.
The numbering of the part front plates PFP is a modular numerical matrix.
The LC-Duplex and MTP® ports within the PFPs have a fixed 1 to 4 labeling.
The PFPs can be numbered with their positions they have within the panels with the exchangeable numbering clips the panels are shipped with.
Material and color:
Steel powder coated RAL9005 black
Adapter types per PFP:
1 LC8 = 4 LC-Duplex ports
2 MTP®-Duplex = 4 MTP® ports
Adapter variants:
LC8: OM4 violet, SM blue
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
Scope of delivery and packaging:
Part front plate fully factory-assembled in carton
SMAP-G2 HD 1/3 HU 1/6 part front plates with matrix numbering
Applications
SMAP-G2 HD empty panels with 6/6 width partition
Properties
The PFPs are toolless inserted from the front side and fixed with quick fasteners.
By this design they can be pulled out to the front for maintenance.
The numbering of the part front plates PFP is a modular numerical matrix.
The LC-Duplex and MTP® ports within the PFPs have a fixed 1 to 4 labeling.
The PFPs can be numbered with their positions they have within the panels with the exchangeable numbering clips the panels are shipped with.
Material and color:
Steel powder coated RAL9005 black
Adapter types per PFP:
1 LC8 = 4 LC-Duplex ports
2 MTP®-Duplex = 4 MTP® ports
Adapter variants:
LC8: OM4 violet, SM blue
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
Scope of delivery and packaging:
Part front plate fully factory-assembled in carton
PreCONNECT® SMAP-G2 High Density (HD) 19” 1HU empty panel 6/6 width partition
Applications
Panel system for data center data cabling
For all IT applications like Ethernet and Fibre Channel
Appropriate for Spine-Leaf architectures, by default 12, optional up to 16 trunks coming from Leaf Switches can be accommodated per HU within SMAP-G2 distribution panels next to the Spine-Switch
Properties
Port density: 72 LC-Duplex or MTP® ports per height unit HU
PFPs and cassettes are toolless inserted from the front side and fixed with quick fasteners
PFPs and cassettes can be pulled out to the front for maintenance
Through its adjustable 19“ mounting brackets the panel can be depth variable mounted
Trunk cables can be routed into the panels through their back planes and either side
At panels with trunk routing through their back planes, which are not fully equipped during their first installation, trunk cables can be retrofitted afterwards and removed for maintenance
Front granularity 6/6 width partition
Material and color:
Panel body: aluminum silver
19“ mounting brackets and front: steel powder coated RAL9005 black
Scope of delivery and packaging:
Distribution panel fully factory-assembled in carton
Blind cover in unused cable inputs
SMAP-G2 HD 8 fiber MTP-LC module cassettes
Applications
For Port-Breakout of PreCONNECT® OCTO trunks with MTP® connectors
Fitting in SMAP-G2 HD panel with 6/6 width partition
Properties
1x MTP® female port 4+4F OCTO at the rear side
4 LC-Duplex ports at the front side
Toolless placement of the module cassettes into the panel from the front side, fixing with quick fasteners
Material and color:
Cassette body and front: aluminum powder coated RAL9005 black
Adapter types:
Rear side: 1 MTP®
Front side: 1 LC8 = 4 LC-Duplex ports
Adapter variants:
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
LC8: OM4 violet, SM blue
Number of fibers:
8
Scope of delivery and packaging:
Module cassettes fully factory-assembled in carton
Adapters mounted
SMAP-G2 HD 8 fiber MTP-LC module cassettes
Applications
For Port-Breakout of PreCONNECT® OCTO trunks with MTP® connectors
Fitting in SMAP-G2 HD panel with 6/6 width partition
Properties
1x MTP® female port 4+4F OCTO at the rear side
4 LC-Duplex ports at the front side
Toolless placement of the module cassettes into the panel from the front side, fixing with quick fasteners
Material and color:
Cassette body and front: aluminum powder coated RAL9005 black
Adapter types:
Rear side: 1 MTP®
Front side: 1 LC8 = 4 LC-Duplex ports
Adapter variants:
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
LC8: OM4 violet, SM blue
Number of fibers:
8
Scope of delivery and packaging:
Module cassettes fully factory-assembled in carton
Adapters mounted
SMAP-G2 HD 8 fiber MTP-LC Port-Breakout-Unit
Applications
For installation in SMAP-G2 HD panel with 6/6 width partition
Properties
1x MTP®4+4 OCTO female connector at cable pigtail
4 LC-Duplex ports at the front side
Toolless placement of the module cassettes into the panel from the front side, fixing with quick fasteners
Material and color:
Cassette body and front: aluminum powder coated RAL9005 black
Adapter types:
Front side: 1 LC8 = 4 LC-Duplex ports
Adapter variants:
MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey
MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green
LC8: OM4 violet, SM blue
Number of fibers:
8
Scope of delivery and packaging:
Port-Breakout-Unit panel fully factory-assembled in carton
Adapters mounted
€167.61
(excl. VAT)
This website uses cookies to ensure the best experience possible. More information...