Fiber optic trunk cable breakout 32 fibers multimode OM4, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)HH
Rosenberger
Product information "Fiber optic trunk cable breakout 32 fibers multimode OM4, MTP®-OCTO-PC-m/ MTP®-OCTO-PC-m, I-F(ZN)HH"
PreCONNECT® OCTO MTP® Breakout Trunk cable
Applications
MTP® (MPO) based data center cabling with 8 fibers per MTP® channel.
Optimized for parallel optics MPO 4+4 fiber applications:
- 40/100/200 GBASE-SR4
- 400GBASE-SR4.2 BiDi
- 4x16, 4x32 and 4x64 GFC
- 100GBASE DR4/PSM4
- 200GBASE-DR4
- 400GBASE-DR4
- 4x10 GBASE-LR
Easy migration to higher speed applications.
More information about the different applications can be found in the product information or in the product profile under Data sheets.
Properties
PreCONNECT® OCTO Breakout Trunk cables with I-F(ZN)HH breakout cables:
Breakout trunk cable have PreCONNECT® square-interfaces on both sides which can be tool-less hooked into the 19” panel systems for tensile and torsion resistant fixing of the trunk cables.
Installation protection:
The trunk connector legs are fitting for the 19“ panel systems and are packed in non-pull resistant dust-proof foil tubes. On request with tensile strength, crush resistant, kink and torsion resistant, installation tubes deliverable.
Connector type:
- OCTO Trunk cables: MTP® OCTO 4+4 fiber male
Polarity:
- OCTO Trunk cables: TIA Method B „1 to 12“
Fiber types:
- Multimode OM4 bend-insensitive
- Singlemode G.657.A1 bend-insensitive and backwards compatible to G.652.D
Length definition:
Order-length = length between the connectors of the longest legs at both sides, not between the PreCONNECT® square-interfaces.
Scope of delivery and packaging:
- Dependent on the length as cable ring or on cardboard or wooden drum
- Insertion loss and return loss measured acc. to IEC 61300-3-4, method B, MM 850/1300nm and SM 1310/1550nm, with measurement protocol
- Product label with serial number at both sides
Benefits
- MTP® cabling system perfectly fitting for SR4 and DR4/PSM4 applications
- Cost reduction through the only for SR4 and DR4/PSM4 needed 8 fibers instead of the so far usual 12 are in one MTP® channel
- Fast and safe installation trough factory assembled plug & play systematic
- Highest quality and cost-efficiency through factory assembling
- PreCONNECT® cabling systems consist of perfectly harmonized modular single components
| CPR class cable: | Dca |
|---|---|
| Fiber chart: | type B (1 to 12) |
| cable diameter: | 8,9 mm |
| cable type: | I-F(ZN)HH |
| channels/fibers: | 16 / 32 |
| connector types: | MTP-OCTO male / MTP-OCTO male |
| core / jacket diameter: | 50/125µm |
| fiber type: | Multimode G50/125 OM4 |
| operating temprature: | -10°C to +60°C |
| product line: | PreCONNECT® OCTO |
Login
Skip product gallery 
Lässt sich verbinden mit:
SMAP-G2 HD 1/3 HU 1/6 blind part front plate
SMAP-G2 HD 1/3 HU 1/6 blind part front plate Applications For installation in SMAP-G2 HD empty panels with 6/6 width partition Properties The PFPs are toolless inserted from the front side and fixed with quick fasteners. By this design they can be pulled out to the front for maintenance. The numbering of the part front plates PFP is a modular numerical matrix. The PFPs can be numbered with their positions they have within the panels with the exchangeable numbering clips the panels are shipped with. Material and color: Steel powder coated RAL9005 black Scope of delivery and packaging: Blind part front plate fully factory-assembled in carton
€6.10 (excl. VAT)
SMAP-G2 HD 1/3 HU 1/6 blind part front plate
SMAP-G2 HD 1/3 HU 1/6 blind part front plate Applications For installation in SMAP-G2 HD empty panels with 6/6 width partition Properties The PFPs are toolless inserted from the front side and fixed with quick fasteners. By this design they can be pulled out to the front for maintenance. The numbering of the part front plates PFP is a modular numerical matrix. The PFPs can be numbered with their positions they have within the panels with the exchangeable numbering clips the panels are shipped with. Material and color: Steel powder coated RAL9005 black Scope of delivery and packaging: Blind part front plate fully factory-assembled in carton
€4.44 (excl. VAT)
SMAP-G2 HD MTP module cassettes 1/3 HE with 6/6 width partition, 8 fibres, LC-Duplex / MTP OCTO multimode fitting for PreCONNECT® OCTO trunks
SMAP-G2 HD 8 fiber MTP-LC module cassettes Applications For Port-Breakout of PreCONNECT® OCTO trunks with MTP® connectors Fitting in SMAP-G2 HD panel with 6/6 width partition Properties 1x MTP® female port 4+4F OCTO at the rear side 4 LC-Duplex ports at the front side Toolless placement of the module cassettes into the panel from the front side, fixing with quick fasteners Material and color: Cassette body and front: aluminum powder coated RAL9005 black Adapter types: Rear side: 1 MTP® Front side: 1 LC8 = 4 LC-Duplex ports Adapter variants: MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green LC8: OM4 violet, SM blue Number of fibers: 8 Scope of delivery and packaging: Module cassettes fully factory-assembled in carton Adapters mounted
€242.59 (excl. VAT)
SMAP-G2 HD MTP module cassettes 1/3 HE with 6/6 width partition, 8 fibres, LC-Duplex / MTP OCTO multimode fitting for PreCONNECT® OCTO trunks
SMAP-G2 HD 8 fiber MTP-LC module cassettes Applications For Port-Breakout of PreCONNECT® OCTO trunks with MTP® connectors Fitting in SMAP-G2 HD panel with 6/6 width partition Properties 1x MTP® female port 4+4F OCTO at the rear side 4 LC-Duplex ports at the front side Toolless placement of the module cassettes into the panel from the front side, fixing with quick fasteners Material and color: Cassette body and front: aluminum powder coated RAL9005 black Adapter types: Rear side: 1 MTP® Front side: 1 LC8 = 4 LC-Duplex ports Adapter variants: MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green LC8: OM4 violet, SM blue Number of fibers: 8 Scope of delivery and packaging: Module cassettes fully factory-assembled in carton Adapters mounted
€231.81 (excl. VAT)
SMAP-G2 HD MTP module cassettes 1/3 HE with 6/6 width partition, 8 fibres, LC-Duplex / MTP OCTO multimode fitting for PreCONNECT® OCTO trunks
SMAP-G2 HD 8 fiber MTP-LC module cassettes Applications For Port-Breakout of PreCONNECT® OCTO trunks with MTP® connectors Fitting in SMAP-G2 HD panel with 6/6 width partition Properties 1x MTP® female port 4+4F OCTO at the rear side 4 LC-Duplex ports at the front side Toolless placement of the module cassettes into the panel from the front side, fixing with quick fasteners Material and color: Cassette body and front: aluminum powder coated RAL9005 black Adapter types: Rear side: 1 MTP® Front side: 1 LC8 = 4 LC-Duplex ports Adapter variants: MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green LC8: OM4 violet, SM blue Number of fibers: 8 Scope of delivery and packaging: Module cassettes fully factory-assembled in carton Adapters mounted
€131.31 (excl. VAT)
Fiber optic patch cord 8 fibers multimode OM4, MTP®-PC-f/ MTP®-PC-f, I-F(ZN)H rund 3,0 mm
PreCONNECT® OCTO MTP® Patch CordsApplicationsMTP® (MPO) based Data Center cabling with 8 fibers per MTP® channel. Appropriate for parallel optics applications:40/100/200 GBASE-SR4400GBASE-SR4.2 BiDi4x16 und 4x32 GFC100G PSM44x10 GBASE-LR200GBASE-DR4400GBASE-DR4More information about the different applications can be found in the product information or in the product profile under Data sheets.PropertiesConnector type:OCTO Patch Cords: MTP® 12 fiber femalePolarity:OCTO Patch Cords: TIA Method B „1 to 12“Fiber types:Multimode OM4 bend-insensitiveSinglemode G.657.A1 bend-insensitive and backwards compatible to G.652.DCable types:FRNC-LSZH cable, for further cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attention report according to IEC 61300-3-4, measurement values on request or via website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging. Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
€48.84 (excl. VAT)
Fiber optic patch cord 8 fibers multimode OM4, MTP®-PC-f/ MTP®-PC-f, I-F(ZN)H rund 3,0 mm
PreCONNECT® OCTO MTP® Patch CordsApplicationsMTP® (MPO) based Data Center cabling with 8 fibers per MTP® channel. Appropriate for parallel optics applications:40/100/200 GBASE-SR4400GBASE-SR4.2 BiDi4x16 und 4x32 GFC100G PSM44x10 GBASE-LR200GBASE-DR4400GBASE-DR4More information about the different applications can be found in the product information or in the product profile under Data sheets.PropertiesConnector type:OCTO Patch Cords: MTP® 12 fiber femalePolarity:OCTO Patch Cords: TIA Method B „1 to 12“Fiber types:Multimode OM4 bend-insensitiveSinglemode G.657.A1 bend-insensitive and backwards compatible to G.652.DCable types:FRNC-LSZH cable, for further cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attention report according to IEC 61300-3-4, measurement values on request or via website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging. Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
€49.67 (excl. VAT)
Fiber optic patch cord 8 fibers multimode OM4, MTP®-PC-f/ MTP®-PC-f, I-F(ZN)H rund 3,0 mm
PreCONNECT® OCTO MTP® Patch CordsApplicationsMTP® (MPO) based Data Center cabling with 8 fibers per MTP® channel. Appropriate for parallel optics applications:40/100/200 GBASE-SR4400GBASE-SR4.2 BiDi4x16 und 4x32 GFC100G PSM44x10 GBASE-LR200GBASE-DR4400GBASE-DR4More information about the different applications can be found in the product information or in the product profile under Data sheets.PropertiesConnector type:OCTO Patch Cords: MTP® 12 fiber femalePolarity:OCTO Patch Cords: TIA Method B „1 to 12“Fiber types:Multimode OM4 bend-insensitiveSinglemode G.657.A1 bend-insensitive and backwards compatible to G.652.DCable types:FRNC-LSZH cable, for further cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attention report according to IEC 61300-3-4, measurement values on request or via website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging. Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
€52.29 (excl. VAT)
Fiber optic patch cord 8 fibers multimode OM4, MTP®-PC-f/ MTP®-PC-f, I-F(ZN)H rund 3,0 mm
PreCONNECT® OCTO MTP® Patch CordsApplicationsMTP® (MPO) based Data Center cabling with 8 fibers per MTP® channel. Appropriate for parallel optics applications:40/100/200 GBASE-SR4400GBASE-SR4.2 BiDi4x16 und 4x32 GFC100G PSM44x10 GBASE-LR200GBASE-DR4400GBASE-DR4More information about the different applications can be found in the product information or in the product profile under Data sheets.PropertiesConnector type:OCTO Patch Cords: MTP® 12 fiber femalePolarity:OCTO Patch Cords: TIA Method B „1 to 12“Fiber types:Multimode OM4 bend-insensitiveSinglemode G.657.A1 bend-insensitive and backwards compatible to G.652.DCable types:FRNC-LSZH cable, for further cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attention report according to IEC 61300-3-4, measurement values on request or via website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging. Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
€74.87 (excl. VAT)
Fiber optic patch cord 8 fibers multimode OM4, MTP®-PC-f/ MTP®-PC-f, I-F(ZN)H rund 3,0 mm €48.60 (excl. VAT)
PreCONNECT® OCTO MTP® Patch CordsApplicationsMTP® (MPO) based Data Center cabling with 8 fibers per MTP® channel. Appropriate for parallel optics applications:40/100/200 GBASE-SR4400GBASE-SR4.2 BiDi4x16 und 4x32 GFC100G PSM44x10 GBASE-LR200GBASE-DR4400GBASE-DR4More information about the different applications can be found in the product information or in the product profile under Data sheets.PropertiesConnector type:OCTO Patch Cords: MTP® 12 fiber femalePolarity:OCTO Patch Cords: TIA Method B „1 to 12“Fiber types:Multimode OM4 bend-insensitiveSinglemode G.657.A1 bend-insensitive and backwards compatible to G.652.DCable types:FRNC-LSZH cable, for further cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attention report according to IEC 61300-3-4, measurement values on request or via website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging. Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Variants from €47.28*
Fiber optic patch cord 8 fibers multimode OM4, MTP®-PC-f/ MTP®-PC-f, I-F(ZN)H rund 2,0 mm €50.94 (excl. VAT)
PreCONNECT® OCTO MTP® Patch CordsApplicationsMTP® (MPO) based Data Center cabling with 8 fibers per MTP® channel. Appropriate for parallel optics applications:40/100/200 GBASE-SR4400GBASE-SR4.2 BiDi4x16 und 4x32 GFC100G PSM44x10 GBASE-LR200GBASE-DR4400GBASE-DR4More information about the different applications can be found in the product information or in the product profile under Data sheets.PropertiesConnector type:OCTO Patch Cords: MTP® 12 fiber femalePolarity:OCTO Patch Cords: TIA Method B „1 to 12“Fiber types:Multimode OM4 bend-insensitiveSinglemode G.657.A1 bend-insensitive and backwards compatible to G.652.DCable types:FRNC-LSZH cable, for further cable specifications see data sheet.Scope of delivery and packaging:Factory-measured attention report according to IEC 61300-3-4, measurement values on request or via website: https://www.rosenberger.com/en/downloads/mdm.php. Serial number labels at the cable ends for network documentation, product ID label on each packaging. Individually packed dust protected in foil bags, as of a length of 100m on cardboard drum, available in any standard length.Length tolerance:Up to 1 m = -50 mm, 2 m to 3 m = -100 mm, 4 m to 25 m = -200 mm, longer than 25 m
Variants from €61.20*
SMAP-G2 HD 19" 1HU empty distribution panels, RAL9005 black, back plane with 12 PreCONNECT® square interfaces, 6/6 widths partition, depth 300 mm
PreCONNECT® SMAP-G2 High Density (HD) 19” 1HU empty panel 6/6 width partition Applications Panel system for data center data cabling For all IT applications like Ethernet and Fibre Channel Appropriate for Spine-Leaf architectures, by default 12, optional up to 16 trunks coming from Leaf Switches can be accommodated per HU within SMAP-G2 distribution panels next to the Spine-Switch Properties Port density: 72 LC-Duplex or MTP® ports per height unit HU PFPs and cassettes are toolless inserted from the front side and fixed with quick fasteners PFPs and cassettes can be pulled out to the front for maintenance Through its adjustable 19“ mounting brackets the panel can be depth variable mounted Trunk cables can be routed into the panels through their back planes and either side At panels with trunk routing through their back planes, which are not fully equipped during their first installation, trunk cables can be retrofitted afterwards and removed for maintenance Front granularity 6/6 width partition Material and color: Panel body: aluminum silver 19“ mounting brackets and front: steel powder coated RAL9005 black Scope of delivery and packaging: Distribution panel fully factory-assembled in carton Blind cover in unused cable inputs
€95.78 (excl. VAT)
SMAP-G2 HD 1/3 HU part front plate with 6/6 width partition, MTPD Multimode grey Typ B algined
SMAP-G2 HD 1/3 HU 1/6 part front plates with matrix numbering Applications SMAP-G2 HD empty panels with 6/6 width partition Properties The PFPs are toolless inserted from the front side and fixed with quick fasteners. By this design they can be pulled out to the front for maintenance. The numbering of the part front plates PFP is a modular numerical matrix. The LC-Duplex and MTP® ports within the PFPs have a fixed 1 to 4 labeling. The PFPs can be numbered with their positions they have within the panels with the exchangeable numbering clips the panels are shipped with. Material and color: Steel powder coated RAL9005 black Adapter types per PFP: 1 LC8 = 4 LC-Duplex ports 2 MTP®-Duplex = 4 MTP® ports Adapter variants: LC8: OM4 violet, SM blue MTP® multimode: TIA type B „aligned centered keys“ „1 to 12“ grey MTP® singlemode: TIA type A “opposed centered keys” „1 to 1“ green Scope of delivery and packaging: Part front plate fully factory-assembled in carton
€39.12 (excl. VAT)
Fiber optic trunk cable harness 8 fibers multimode OM4, MTP®-PC-f/ LC-Compact, I-F(ZN)H(ZN)H
PreCONNECT® OCTO OM4 MTP®-LCC harness Applications For connecting a MPO4+4 transceiver with four LC-Duplex transceivers and for port-breakout of OCTO MTP® trunks: 40GBASE-SR4 MPO4+4 to 4x 10GBASE-SR/SW LC-Duplex 100GBASE-SR4 MPO4+4 to 4x 25GBASE-SR/SW LC-Duplex 200GBASE-SR4 MPO4+4 to 4x 50GBASE-SR/SW LC-Duplex 4x16GFC MPO4+4 to 4x 16GFC LC-Duplex 4x32GFC MPO4+4 to 4x 32GFC LC-Duplex 4x64GFC MPO4+4 to 4x 64GFC LC-Duplex More information about the different applications can be found in the product information or in the product profile under Data sheets. Properties PreCONNECT® OCTO OM4 MTP®-LCC harness: Robust harness divider with double jacket cable 8 OM4 fibers 3.0 / 4.5 mm FRNC-LSZH at the MTP® side and four 2.0mm 2 fiber LC-Compact leg-lengths 0.5 m, legs numbered 1 to 4. Connector type: MTP® 4+4 OCTO, MM, female, Elite quality LC-COMPACT Polarity: Rx to Tx Fiber types: Multimode OM4 bend-insensitive Singlemode G.657.A1 bend-insensitive Length definition: Order-length = total length Scope of delivery and packaging: Attenuation (IL) measured in accordance with IEC 61300-3-4 „C“ or „Substitution“ method, MM 850nm/SM 1310nm, measurement values on request, or can be downloaded from our website by using the serial numbers of the harnesses (https://www.rosenberger.com/products/download-measurement-data/) Serial number labels with length information at harness divider Individually packaged in foil bags with product ID label Benefits The perfect harness for connecting a MPO4+4 transceiver with four LC-Duplex transceivers and for port-breakout of OCTO MTP® trunks
€93.30 (excl. VAT)