Reel Cleaner MTP®/MPOApplicationsCleaning tool for ferrule end faces of non-installed fiber optic connectors type MTP®/MPO. Cleaning directly through a coupling is not possible. Cleaning of non-installed 2.5 mm and 1.25 mm ferrules is possible.PropertiesHigh quality product with optimal light injection through integrated full ceramic ferrule interfaceUniversal adapter for Ø 2.5 mm ferrules for ST, SC, DIN, E2000 etc. with adapter for Ø 1.25 ferrules for LC and MU Technical data:Dry ABS cleaning tapeRefillableSuitable for MTP® / MPO MM and SM (8°-APC) female and maleNot suitable for MT-RJ femaleScope of delivery and packaging:Individually packed in a carton.

Click CleanerApplicationsCleaning tool for ferrule end faces of fiber optic connectors. A cleaning directly through an adapter is possible, deinstallation of the connector is not necessary. It is also possible to clean open patch cable ferrules with the attached adapter, which also serves as protection against contamination of the cleaning tape. The cleaning process is triggered by pressing the handpiece.PropertiesThe tip can be pulled out in order to be able to clean even deep-seated connectors or tightly packed patch panels. Three different versions allow the cleaning of ferrules with diameters of 1.25 or 2.5 mm.Scope of delivery and packaging:Individually packed in a carton.

Click CleanerApplicationsCleaning tool for ferrule end faces of fiber optic connectors. A cleaning directly through an adapter is possible, deinstallation of the connector is not necessary. It is also possible to clean open patch cable ferrules with the attached adapter, which also serves as protection against contamination of the cleaning tape. The cleaning process is triggered by pressing the handpiece.PropertiesThe tip can be pulled out in order to be able to clean even deep-seated connectors or tightly packed patch panels. Three different versions allow the cleaning of ferrules with diameters of 1.25 or 2.5 mm.Scope of delivery and packaging:Individually packed in a carton.

Cleaner MTP®/MPO ferrulesApplicationsCleaning tool for ferrule end faces of fiber optic connectors type MTP®/MPO. A cleaning directly through an adapter is possible, deinstallation of the connector is not necessary.The cleaning of open patch cable ferrules is also possible with an MTP®/MPO adapter.PropertiesDry ABS textile tapeDisposable tool, no replacement tape can be usedSuitable for MTP® / MPO MM and SM (8°-APC) female and maleScope of delivery and packaging:Individually packed in a carton.

Reel Cleaner MTP®/MPO Applications Cleaning tool for ferrule end faces of non-installed fiber optic connectors type MTP®/MPO. Cleaning directly through a coupling is not possible. Cleaning of non-installed 2.5 mm and 1.25 mm ferrules is possible. Properties High quality product with optimal light injection through integrated full ceramic ferrule interface Universal adapter for Ø 2.5 mm ferrules for ST, SC, DIN, E2000 etc. with adapter for Ø 1.25 ferrules for LC and MU Technical data: Dry ABS cleaning tape Refillable Suitable for MTP® / MPO MM and SM (8°-APC) female and male Not suitable for MT-RJ female Scope of delivery and packaging: Individually packed in a carton.

Fiber Optic Measurement CablesApplicationsPatch cables suitable for measurement applications in the laboratory or in the field.PropertiesReliable measurements with excellent repeatability thanks to measurement cables with precisely specified connectors.Measurement cable connectors that conform to particularly low tolerances.Connectors with wear-resistant ceramic ferrules.Singlemode: The limit value for the eccentricity of the fiber core is 0.3 µm and the maximum permitted value for Apex offset is 30 µm.Scope of delivery and packaging:With individually documented report. To enable us to guarantee the outstandingly low tolerances of our measurement cables, these pass through several exceptionally demanding test procedures. The eccentricity measurement device is used to check whether the fiber core is located exactly in the center of the ferrule. The quality requirements permit a maximum eccentricity of 0.3 µm. The interferometer is used to measure the geometry of the ferrule endface, which is then displayed using a range of imaging methods. Here again, only the tiniest tolerances are permitted.

Fiber Optic Measurement CablesApplicationsPatch cables suitable for measurement applications in the laboratory or in the field.PropertiesReliable measurements with excellent repeatability thanks to measurement cables with precisely specified connectors.Measurement cable connectors that conform to particularly low tolerances.Connectors with wear-resistant ceramic ferrules.Singlemode: The limit value for the eccentricity of the fiber core is 0.3 µm and the maximum permitted value for Apex offset is 30 µm.Scope of delivery and packaging:With individually documented report. To enable us to guarantee the outstandingly low tolerances of our measurement cables, these pass through several exceptionally demanding test procedures. The eccentricity measurement device is used to check whether the fiber core is located exactly in the center of the ferrule. The quality requirements permit a maximum eccentricity of 0.3 µm. The interferometer is used to measure the geometry of the ferrule endface, which is then displayed using a range of imaging methods. Here again, only the tiniest tolerances are permitted.

Test LaserApplicationsLaser light source for troubleshooting, fiber identification and connector testing.Robust test laser for visual inspection of fiber optic cabling. In addition to checking fiber assignments, the test laser is also suitable for troubleshooting. Due to the high coupled optical power, fiber breaks can be detected by the emerging light.The rubber armoring makes the device extremely robust. The readiness bag supplied makes it a universal testing device for the fibre optic technician.PropertiesHigh quality product with optimal light injection through integrated full ceramic ferrule interfaceUniversal adapter for Ø 2.5 mm ferrules for ST, SC, DIN, E2000 etc. with adapter for Ø 1.25 ferrules for LC and MU Technical data:Wavelength: 635 nmCoupled power > 500 µW (typ. 600 µW) in singlemode and multimodeLaser class: 2, IEC 825-2 (< 1µW)Operating modesFlashing or continuous lightScope of delivery and packaging:Individually packed